ranger 1,760 #1 Posted May 27 (edited) Hi guys, I’m just being lazy here. Can anyone tell me offhand, what the diameter of the tensioner pulley for the 8speed C series tractors is? I could go and measure one, but, as I said, “I’m just being lazy”, relaxing in my armchair with the doggo asleep on my lap! My excuse anyway! Edited May 27 by ranger Share this post Link to post Share on other sites
rmaynard 15,580 #2 Posted May 27 Yeah, I hear ya. I'm going to be lazy too. Sitting in my lawn chair, I can just barely see my tractor, but I'd guess the diameter is about 3.something". 3 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,090 #3 Posted May 27 For the idler pulley #7451 V-idler pulley - 4.000" OD - HD 52-4580 or 524580 replaced by WH 99-5678 or 995678 {$40.84} (Stens 280-362 HD 4.000" OD x .375" ID (1/4" offset) x 3/4" HT, Napa 7-05485 HD) V-idler pulley - 4.000" OD - Std 7451 replaced by WH 95-7668 or 957668 {$16.20} (Stens 280-313 Std 4.000" OD x 13/64" wide x 3/8" ID) The HD one has a real sealed ball bearing in it. 3 1 Share this post Link to post Share on other sites
