ANTPER 207 #1 Posted May 14 Can anyone suggest where I can find a replacement battery tray for example on a 312? TIA Anthony Share this post Link to post Share on other sites
lynnmor 7,320 #2 Posted May 14 Google "Toro 106948" and see if that is what. shopping.webp s-l960.webp 1 Share this post Link to post Share on other sites
peter lena 8,653 #4 Posted May 14 @ANTPER OPPORTUNITY , is the word here , while you are right there , notice the sloppy PTO LEVER SET UP ? get some washers and teflon / plastic washers , and firm up that starting point , also like silicone grease for a lube , as shown / suggested , you are right there , notice elastic lock nut ? that goes on a 2 bolt flange bearing , improvement , gold mine of issues . also add another engine ground , from battery ground to engine ground , better charging . easy stuff , pete Share this post Link to post Share on other sites
ANTPER 207 #5 Posted May 14 18 minutes ago, peter lena said: @ANTPER OPPORTUNITY , is the word here , while you are right there , notice the sloppy PTO LEVER SET UP ? get some washers and teflon / plastic washers , and firm up that starting point , also like silicone grease for a lube , as shown / suggested , you are right there , notice elastic lock nut ? that goes on a 2 bolt flange bearing , improvement , gold mine of issues . also add another engine ground , from battery ground to engine ground , better charging . easy stuff , pete Yes as a matter of fact the PTO handle is rather sloppy with extra play. Great tip thanks much! Share this post Link to post Share on other sites
peter lena 8,653 #6 Posted May 14 @ANTPER as you add to the side lever pull washer set up use a silicone base lubricate , as you stack them up , also note the outside lever snap on clip to dash side snug fit ,that entire lever can be improved , so its smooth , solid strong , that HEIM joint is simply a die nut over thread original was 3/8 x 16 , went to a 3/8 x 24 , right over original threading , penetrating oil to assist cutting / cleaning , went after every original intent , and improved it . thats been the basis of change on almost every area , detail it in , improve grease grade , snug things up , it just works better . that simple battery tender , plug in leader , is always there for quick access , the battery ground cable to engine enhances the engine tin electrical issue . better headlight grounding , make sense ? anything else just ask , pete Share this post Link to post Share on other sites
