Rick3478 428 #26 Posted May 29 (edited) 19 hours ago, HVYTWR said: Interesting approach. Looks like it's set screwed over top of the brake pedal, do I have that right? Would save trying to weld on cast iron pedal, which can be tricky. I might be interested in those parts, let us know ... Edited May 29 by Rick3478 Reduce Clutter Share this post Link to post Share on other sites
HVYTWR 12 #27 Posted May 29 1 hour ago, Rick3478 said: Interesting approach. Looks like it's set screwed over top of the brake pedal, do I have that right? Would save trying to weld on cast iron pedal, which can be tricky. I might be interested in those parts, let us know ... Yes, you are correct it has 3 set screws locking it to the pedal (you can only see one in the photo). I didn't want to weld on the cast pedal and this also gives the ability to adjust the pedal position for operator preference independently from the optimum linkage geometry. I'll get some better photos of everything I am offering an post it. The pedal is not used, it's "New Old Stock", and with the other hardware and fabrication I did I was thinking of $150 shipped??? I assume I should be posting it in the classifieds section and not here in this thread.......correct? Share this post Link to post Share on other sites
Handy Don 12,235 #28 Posted May 29 34 minutes ago, HVYTWR said: .correct? Yep! Share this post Link to post Share on other sites
HVYTWR 12 #29 Posted June 3 OK everyone, I have my pedal kit listed in the classifieds! Share this post Link to post Share on other sites
