JimSraj 432 #1 Posted May 2 Anyone know the specs on the gas cylinder (78-3240) for the drive belt tension pulley on a ‘93 310-8? Share this post Link to post Share on other sites
JoeM 7,874 #2 Posted May 2 Might want to check with these folks, they may help with a reasonable price Share this post Link to post Share on other sites
JimSraj 432 #3 Posted May 3 Thanks Joe! I will call them tomorrow. Since I posted I found out that AZ tractor has an aftermarket. Calling Lincoln tomorrow as well. Also thinking of just putting a spring on it. 2 Share this post Link to post Share on other sites
Lee1977 6,774 #4 Posted May 3 (edited) Most of us just take them off and use the spring like the older models. Edited May 3 by Lee1977 5 Share this post Link to post Share on other sites
Pullstart 63,080 #5 Posted May 3 @JimSraj you’d be better off just installing a spring. Share this post Link to post Share on other sites
Bill D 1,932 #6 Posted May 3 If you put a spring on it you may want to add a dampener that was also found in the older models. I did that on my 312-8 and it made the tractor much less jumpy. Share this post Link to post Share on other sites
JimSraj 432 #7 Posted May 3 5 minutes ago, Bill D said: If you put a spring on it you may want to add a dampener that was also found in the older models. I did that on my 312-8 and it made the tractor much less jumpy. Ive got it apart now and will be putting a spring on today. Do you have any pictures of that dampener installed? Share this post Link to post Share on other sites
Bill D 1,932 #8 Posted May 4 22 hours ago, JimSraj said: Ive got it apart now and will be putting a spring on today. Do you have any pictures of that dampener installed? I don't. Maybe someone else does. I maybe able to get one later if I remember. Share this post Link to post Share on other sites
