Shuboxlover 478 #1 Posted August 28, 2009 Long story short, I am restoring my GT1642 Work Horse. While I do that, I bought and am going to use a GT1142 Work Horse. The carb was somewhat disassembled and I was wondering if anyone has pics of how to hook up the linkages and springs. I have exploded diagram parts list of the carb, but it doesn't show how you hook it up, just the individual pieces. any ideas??? Thanks in advance. Share this post Link to post Share on other sites
dkopp 1 #2 Posted September 3, 2009 Don't know if this will help you but it's all I have at the moment. I don't have a picture of how the springs are setup, but this is how the cables were setup when I got the tractor. Dan Share this post Link to post Share on other sites
dkopp 1 #3 Posted September 3, 2009 I forgot to mention that this setup was on a C-111 and not a WorkHorse. I suspect that the two are not that different in setup though. Dan Share this post Link to post Share on other sites
Shuboxlover 478 #4 Posted September 4, 2009 Thanks for the "front" pic of the carb, that does help. If anyone has a pic of the springs, I could really use that too, if it's not too much trouble. Thanks again Share this post Link to post Share on other sites
