IT'S a D-180 & IT'S all MINE!!

[Southern_Secret 463]

Hello fellow Horse Heads long time no post for me, life gets crazy & a lot of things change sometimes but anyhoo. So back a few years ago when I first got my 1994 314-H I had it at my shop going threw it. One of my customers walk past as im working and said, you know I think Iv got a Wheel Horse & im thinking "no you dont buddy". I give him my # to send pics thinking it was a big waste of time & after getting the pics I realized he did have a Wheel Horse! I hand shake bought it right there, asked him to bring it to my store & he said no problem. Well after almost 2 years it is finally in my orbit. I know very little about it other than his father-inlaw got it new and used it around his house moving snow and stuff. His father inlaw moved down south here when his daughter got married and gave the tractor to my customer because he had a farm & his the inlaw had no use for it anymore. Same with every barn find, "it was running when parked" 8 years ago, said one of the axel seal is leaking. Im happy and hope I can get it back in running order soon cause it is going to be handy around the truck farm!!

 

I will post Pics as soon as I reinstate my membership

Edited April 24 by Southern_Secret

[OutdoorEnvy 1,522]

Wow great score!  Front loader and a 3pt!  That will be a handy rig for sure!

[Wayne0 455]

I'll betcha' stole it too!

[ol550 830]

For a few of us a D series is like a boat.  Excited the day you get it and even happier to see it going down the driveway.

[Southern_Secret 463]

1 hour ago, Wayne0 said:

I'll betcha' stole it too!

Well as of now there as been no cotton paper change hands..............and being as he said "if the scrap yard would have been open today it would have went there" the day he dropped it off, im not suspecting there will be but I could be wrong.

[JoeM 7,873]

Looks like some wicked stacks too!

 

they are a heavy machine and will do work. 

 

Do keep an eye on the pump to engine coupler as they are prone to fail. Always throttle down be fore turning off the engine also. my neighbor snapped mine off and zinged the coupler spline. 

[Southern_Secret 463]

15 minutes ago, ol550 said:

For a few of us a D series is like a boat.  Excited the day you get it and even happier to see it going down the driveway.

The more digging I do on here the more nerves I get about it 

[ebinmaine 67,422]

. Back!!

 

 

 

[Southern_Secret 463]

@JoeM The pump coupler is looking good from what I can tell.

[Southern_Secret 463]

I know the list will probably get longer, but thus far these are the issues im working threw

Im sure some D-series fanatics will find the thread  (I hope)

 

#1- The dadgum gas tank is rust welded to the fender pan

 

#2- The steering wabbles so much it got pulled over for DUI 

 

#3- Im pretty sure the FEL pump is pushed against the frame around the grill

 

#4- One of the axel seal is leaking 

 

the rest is un-none at the time.

[ebinmaine 67,422]

There's a checklist in this following thread. Might help you sort through things. Not specific to any particular model so there's going to be some unneeded information in there.

 

 

 

 

[JoeM 7,873]

The three point was nice for hooking up a weight box.

I believe the steering box has an adjustment maybe someone here might be able to help with that issue. 

And to be honest. I took the loader off and put it on a 520H because of consistent issues with the D. Coupler issues, Hydro piping leaks, and very, very hard to steer with a load. The 520 reduction steering was a big improvement. 

If I was only using it once in a while I would have kept it, but I used it all the time and the steering was a deal breaker. 

 

I actually moved my gas tank back some cause I eat well. It has been a while and can't remember how tho.

 

My loader was homemade and the pump mounted underneath and utilized the mule drive for the mower deck to route the belt.

[Southern_Secret 463]

@JoeM I do understand more clearly than I'd like  that the D's come with there baggage. Only other tractors I have is a 314h, ym1300, and 2605 massy & I dare not put the FEL on my 314h.

Im not sure how the tank got rusted to the fender pan. I got all the nuts off no problem, but one corner of the tank is "stuck" to the fender pan 

[JoeM 7,873]

3 hours ago, Southern_Secret said:

Im not sure how the tank got rusted to the fender pan

better then JB Weld! 

[Achto 27,565]

4 hours ago, Southern_Secret said:

I do understand more clearly than I'd like  that the D's come with there baggage.

 

D's are not all that bad, to me they are a little more like working on a Cub Cadet.

[Southern_Secret 463]

Question, does anyone know the Wheel Horse Part# for a carb kit? I found a # in my small engine book Part# 2575701s, but I want to be sure it is right before ordering it. TIA

[Southern_Secret 463]

Another Question I have is, with the tractor not running (cause iv not got it running yet lol) I can push the motion control lever forward & almost back to the Neutral position and it stops moving...is this normal??

[ebinmaine 67,422]

1 hour ago, Southern_Secret said:

Question, does anyone know the Wheel Horse Part# for a carb kit? I found a # in my small engine book Part# 2575701s, but I want to be sure it is right before ordering it. TIA

 

That's the correct number for a single cylinder Kohler carb. If it's a twin, 2575702

[Southern_Secret 463]

Thanks @ebinmaine you always got the slack out the trigger ready to go , it is indeed a twin cylinder & I thought that part# looked wrong so I asked.

[Southern_Secret 463]

@ebinmaine I cant make that Part# work, this is what there showing in my book. They might have superseded it im not sure

[ebinmaine 67,422]

That looks like the newer style twin. Command?

 

Try 2575702S 

 

I failed to put the S on the first time

[Southern_Secret 463]

@ebinmaine The one I was referring to is the 2nd from the top of page.

So I got the 2575702s to cross finally and this is what it crossed to in my napa system. I might have to go threw Kohler to get it

[ebinmaine 67,422]

You can get them online for about $20, $25. Original Kohler. Here's an eBay listing number you can search if you like.

 

165926250876

[Southern_Secret 463]

Thank you @ebinmaine, im trying to get this beast running & make sure there is no huge problems with it before dump time and $ in it.

How common was the Johnnson loaders on them? I see most all with the ARK & it seems top be built better and the controls are on the left, as mine is on the right & I see this being an issue when operating FEL while driving.

[ebinmaine 67,422]

3 hours ago, Southern_Secret said:

Thank you @ebinmaine, im trying to get this beast running & make sure there is no huge problems with it before dump time and $ in it.

How common was the Johnnson loaders on them? I see most all with the ARK & it seems top be built better and the controls are on the left, as mine is on the right & I see this being an issue when operating FEL while driving.

 

I'm not sure on production numbers or years made...

 

As far as the controls go, I'll say this. I run different machines at home and at work. 

There are ups & downs to having controls on either side. 

Whatever way it's set up you'd get used to it and eventually the operation becomes about muscle memory.