Blairman85 0 #1 Posted April 19 So I have a 416 hydro that had a 42-in mower deck on it. I switched down to a 36-in mower deck but my belt that runs from my motor through my mule to the mower deck is too long. I believe it is a 97 in belt. What belt should I have from my motor to my mower deck? I don't know if you would just call it a mule belt Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,045 #2 Posted April 19 36" rear discharge Drive belt 102741 (1/2" x 96.6") for C-Series tractors (Gates replacement BladeRunner 6638BR 17/32" x 96.75") 42" side discharge Drive belt 102742 replaced by 94-2501 (1/2" x 103") 42" rear discharge Drive belt 108834 (1/2" x 98") 4 1 Share this post Link to post Share on other sites
953 nut 55,230 #3 Posted April 19 Turning the knob on the front of the mule drive counterclockwise will tighten the belt. Share this post Link to post Share on other sites
