Ed Kennell 38,177 #1 Posted April 5 Any one seen this aftermarket snow plow? Share this post Link to post Share on other sites
ri702bill 8,322 #2 Posted April 5 (edited) No, ED, but it does look a tad familiar...... except for the manual pullpin to angle it... Googled both names on the tag - no info. A name from days gone by??? Edited April 5 by ri702bill 1 Share this post Link to post Share on other sites
JoeM 7,874 #3 Posted April 6 Sure looks like a company that made plows too. Would not surprise me if they were the mfg for WH? Seen this at an auction site. https://www.auctiontime.com/listings/farm-equipment/auction-results/215320567/new-vac-mfg-42 2 1 Share this post Link to post Share on other sites
lynnmor 7,306 #4 Posted April 6 (edited) 19 hours ago, Ed Kennell said: Any one seen this aftermarket snow plow? Here is a bit of information about New Vac Mfg. Apparently New Vac was a Wheel Horse dealer that made accessories, perhaps putting his stickers on WH parts or vice-versa. https://www.google.com/maps/@40.1058774,-85.6476126,3a,75y,4.46h,90t/data=!3m6!1e1!3m4!1spaSukUK_9gVgmdZmIA12Tw!2e0!7i16384!8i8192?entry=ttu Edited April 6 by lynnmor 2 Share this post Link to post Share on other sites
peter lena 8,628 #5 Posted April 6 @Ed Kennell have not seen one , but looks like a duplicate to W/H , that set up on milk crates , would allow a roller stool around it , to do a detail / functional check , watch how it works , suspended off the ground . thats how you , detail in a plow , steering quadrant , area , red grease spray lubricant , also great opportunity , to HEIM JOINT the blade swing , connection rod , detail in its squeeze lever , for smooth easy operation , also vital to get a lubrication soak going on that starved paint , those front load springs , could easily be helped with some lubricant ? been trying a graphite spray on the front of my plows , slides snow , like nothing . no rust on my plows . pete 1 Share this post Link to post Share on other sites
