TJN 18 #1 Posted April 5 I have a 1973 C120 (1 0460-8) 42" mower, 12hp, automatic. The "pull handle" will move the mower up etc. BUT won't lock into place. PINTA! I've had it apart but don't see a problem. Any suggestions? Many thanks, TJN Share this post Link to post Share on other sites
Lee1977 6,667 #2 Posted April 5 15 minutes ago, TJN said: I have a 1973 C120 (1 0460-8) 42" mower, 12hp, automatic. The "pull handle" will move the mower up etc. BUT won't lock into place. PINTA! I've had it apart but don't see a problem. Any suggestions? Many thanks, TJN If the lift rod is adjusted too short will cause it not to latch up. 3 Share this post Link to post Share on other sites
TJN 18 #3 Posted April 5 Lee, thanks for the info! I'll try to adjust in the AM! Thanks again. TJN Share this post Link to post Share on other sites
Ed Kennell 38,227 #4 Posted April 5 Is deck attached to the attach-o-matic correctly? The notch in the deck support rod must be hooked on the larger rod on the tractor. Share this post Link to post Share on other sites
