brentvdg 2 #1 Posted April 2 Hi All - I brought home a new horse last week, my first 314H. The prior owners neglected it pretty bad, but I'm doing my best to bring her back to good health. Despite the lack of care, it actually had a set of hubcaps, that I'd love to refurbish, but I'm having a hard time getting them off the wheels. Do any of you have any advice on removal without much damage? Thanks! Brent Share this post Link to post Share on other sites
Ed Kennell 37,282 #2 Posted April 2 Did you try tapping this under the edges? 2 Share this post Link to post Share on other sites
ri702bill 8,039 #3 Posted April 2 Are not the 12" ones held in with clips thru the 1/2" square holes?? Share this post Link to post Share on other sites
peter lena 8,413 #4 Posted April 2 @brentvdg , have any KROIL PENETRATING OIL ? pete Share this post Link to post Share on other sites
JCM 9,040 #5 Posted April 2 (edited) Go in from the back side through one of the holes for the wheel weights with something round and lightly tap it not to dent the outer side of the hubcap. @brentvdg Don't pry it from the front if they are in nice shape. Edited April 2 by JCM Share this post Link to post Share on other sites
brentvdg 2 #6 Posted April 2 Hi All, I got them off. I initially started with the toughest one earlier, so thought they were all on there really tight. The crowbar with a rubber mallet did the trick. I am still perplexed about how I found wasp nests, some sort of poop and tons of grime behind these things. Oh well, onto the elbow grease portion of the job. Thank you all for the suggestions! Brent Share this post Link to post Share on other sites
brentvdg 2 #7 Posted April 2 2 minutes ago, JCM said: Go in from the back side through one of the holes for the wheel weights with something round and lightly tap it not to dent the outer side of the hubcap. @brentvdg Don't pry it from the front if they are in nice shape. Well, they weren't in nice shape, so went from the front. I got through it with minimal damage....nothing I can't fix up. Thanks! 1 Share this post Link to post Share on other sites