Pullstart 62,834 #1 Posted March 22 This is kind of the reason I started hanging tractors in the first place. I wanted to have a ceiling fan, but each project turned into a not so convenient spot to have it, or to hang it. I started by wheeling this 1076 frame up from the boneyard, thinking it would be nice to hang from the F plate and build a tach-a-matic mount for the fan. Doing some round about measuring, I realized I would be operating around 8’ off the ground with the final product, which should work ok. 1 1 Share this post Link to post Share on other sites
Pullstart 62,834 #2 Posted March 22 Then, I thought about a shorter frame, then I remembered this clapped out one I had from a bundle buy where a seller just started adding more and more stuff to my truck. It had been chopped, drilled, welded, and modified for another engine. Every movable part on the frame was rusted up tight! A little bit of prep work and my yard art stash was ready to be hung! 1 2 Share this post Link to post Share on other sites
Pullstart 62,834 #3 Posted March 22 This is a C series F plate. I drilled some holes in the angle iron and it was prepped to go into the attic for a secure mount. I drilled the holes needed, and dropped some bolts down through the ceiling. 2 Share this post Link to post Share on other sites
Pullstart 62,834 #4 Posted March 22 Now time for the safety folks to look away. I had to get creative, and it was a bit wobbly at times but I trusted my balance. Enough said. 2 2 1 Share this post Link to post Share on other sites
Pullstart 62,834 #5 Posted March 22 After tossing some Regal Red at the blades and allowing them to tack up a bit, I mounted them and then the light fixture. Other than smoking a brisket, two pork loins and a turkey leg for a birthday party shindig tomorrow, my day’s goals are accomplished! 7 7 Share this post Link to post Share on other sites
ebinmaine 67,422 #6 Posted March 22 I'm a big fan of this. 1 8 Share this post Link to post Share on other sites
elcamino/wheelhorse 9,297 #7 Posted March 22 and he wonders why his health insurance is so high. Good thing Mrs. P has the ambulance on speed dial. 8 Share this post Link to post Share on other sites
Pullstart 62,834 #8 Posted March 22 1 hour ago, elcamino/wheelhorse said: and he wonders why his health insurance is so high. Nope, I’ve never questioned the cost of me! I do know, with the life insurance policy on me, I’m worth more under the dirt than above it! 6 Share this post Link to post Share on other sites
Pullstart 62,834 #9 Posted March 22 1 hour ago, ebinmaine said: I'm a big fan of this. cooool 1 Share this post Link to post Share on other sites
ebinmaine 67,422 #10 Posted March 22 3 minutes ago, Pullstart said: Nope, I’ve never questioned the cost of me! I do know, with the life insurance policy on me, I’m worth more under the dirt than above it! Me too buddy Share this post Link to post Share on other sites
ri702bill 8,316 #11 Posted March 22 9 minutes ago, Pullstart said: I do know, with the life insurance policy on me, I’m worth more under the dirt than above it! There's a reason to sleep with one eye open...!! 1 5 Share this post Link to post Share on other sites
Skwerl58 704 #13 Posted March 22 Sometimes you must improvise to meet the desired goal, great job! Incidents happen, last week while adjusting my disc harrow on my 414-8 the disc dropped a little and it took 5 stitches to close up the top of my trigger finger on my right hand. If you do stuff, stuff happens. Glad you got it mounted, a great idea. 2 1 Share this post Link to post Share on other sites
ebinmaine 67,422 #14 Posted March 22 1 minute ago, Skwerl58 said: If you do stuff, stuff happens Great way to put that. Go sit down and don't get hurt. But I'm not sitting down. BBT got to counting up how many times she's broken a bone over the years. I think it was 17 or 19? You couldn't get her to set if you had duct tape and the best rope. 3 1 1 Share this post Link to post Share on other sites
Pullstart 62,834 #15 Posted March 22 Surprisingly, I think I’ve only ever broken one bone… a finger in wood shop in high school. I’ve fractured more since then, but only one break. I guess I still bounce well! 2 Share this post Link to post Share on other sites
Wayne0 455 #16 Posted March 22 Man, you are INSANE! 1 1 Share this post Link to post Share on other sites
Pullstart 62,834 #17 Posted March 22 31 minutes ago, Wayne0 said: Man, you are INSANE! Best compliment I’ve heard all 3:00 hour! 4 Share this post Link to post Share on other sites
SylvanLakeWH 25,535 #18 Posted March 22 Outstanding... 1 Share this post Link to post Share on other sites
ri702bill 8,316 #19 Posted March 22 (edited) Somehow, I feel that Elmer & Cecil would have approved.... but they just might say " Ya might be wantin' ta dust a coat of Red on that hood..." Edited March 22 by ri702bill 2 1 Share this post Link to post Share on other sites
Pullstart 62,834 #20 Posted March 22 19 minutes ago, ri702bill said: Somehow, I feel that Elmer & Cecil would have approved.... but they just might say " Ya might be wantin' ta dust a coat of Red on that hood..." I thought about that, I did. It’s not too late, but it’s been sitting in the shop like that for close to a year or better. 2 Share this post Link to post Share on other sites
953 nut 55,189 #21 Posted March 22 Kevin, you keep this up and you will need to change your screen-name, 1 3 Share this post Link to post Share on other sites
953 nut 55,189 #22 Posted March 22 7 hours ago, elcamino/wheelhorse said: and he wonders why his health insurance is so high. Good thing Mrs. P has the ambulance on speed dial. Kevin accumulates frequent visitor points at the ER, every tenth visit is on the house. 1 6 Share this post Link to post Share on other sites
Tractorhead 9,064 #23 Posted March 23 I like the hanging tractas even because i knew there will follow more. Call it intuition or however you want.... The Strictly OSHA Conform Ladder use is spectacular.🥳🤪😎 Could imagine you be next time invited for an Article in an OSHA Magazin at - „prevent this“ 😂 4 Share this post Link to post Share on other sites
Mickwhitt 4,617 #24 Posted March 23 That ladder set up looks as solid as a rock, I've definitely climbed less stable rigs when decorating. If it were me, I'd grab a can of black paint and do a big ole jagged hole shape on the ceiling around the hood. Make it look like the machine had broke through from the loft. 4 3 Share this post Link to post Share on other sites
Wild Bill 633 845 #25 Posted March 23 How long before we see a picture of a yellow and green Yardwomen hanging by a noose? 2 Share this post Link to post Share on other sites