2024 Big Show Buy Trade Sell

[rjg854 11,361]

1 hour ago, squonk said:

Looks like the "winter hood"  I had on Ezra

I believe you are correct

[Handy Don 12,232]

57 minutes ago, 953 nut said:

Here are pictures of the hitch adapter, if it will work for you it is yours for free. Made from 2" channel iron cut down to 5/8" and bent.

Ingenious way to attack the problem, for sure. Never woulda entered my mind to use channel.

Sure, I can use that--I’m not moving really heavy trailers and I'll weld some reinforcement underneath if necessary.

Thanks!

[76c12091520h 3,620]

2 early model decks, $30.00 each or $50.00 for the pair

[whtractors24 3,116]

Tractor cover 

$60 each per tractor cover 

$100 for the oem cover -2 left 

 

$200 nos oem cover never used. 1 left 

 

 

 

[Horsin'round 79]

I am looking for a good solid hood for my C-160, similar to what rjg854 is offering.  Please let me know if you have one to pass along, and what you are asking for it.

[wallfish 17,000]

5 hours ago, whtractors24 said:

$60 each per tractor cover 

I'll see you down there and probably take one Jason.

[rjg854 11,361]

Any interest in a Briggs and Stratton BR6 engine?

[Ed Kennell 38,175]

Some of you may remember the Wooden Wheel Horse Head I made some years back.

 

My Wooden Horse. - non tractor related discussion - RedSquare Wheel Horse Forum

 

I have had requests but never had the time, or took the time, to make another one.

This  winter while being homebound taking care of Mrs K. I had time and needed an indoor project when @AMC RULES  PMed me requesting one.   Mrs K has been recovering from foot surgery and has been in a wheel chair for two

months.

 

So, I made a couple dozen of these smaller versions.    They are all hand made and imperfect with poor paint.     I have about 15 left that I can  bring to the show.

 

 

So, I have one reserved or you Craig.

 

 

 

[Docwheelhorse 2,660]

Morning... posted a 42 rd deck and some 26x12x12 Kendas in for Wheel Horse for sale section. Dropping note here as I will bring to show and wanted more attention

 

 

[Sailman 1,291]

Thanks to all the folks helping me get my parts together for the C-120. Just to confirm details...

@Pullstart you have the steering wheel and @rjg854 you have the hood. Still need the 1 piece belt guard (not attached to the footboard).

@WHX?? or @adsm08 do either have one you can bring to the big show?

Anybody providing parts message me if you need $$ for the parts.

@953 nut will be bringing parts back to Georgia for me

and HAPPY FATHERS DAY to all the Dads out there!

 

[Sparky-(Admin) 21,318]

46 minutes ago, Ed Kennell said:

Some of you may remember the Wooden Wheel Horse Head I made some years back.

 

My Wooden Horse. - non tractor related discussion - RedSquare Wheel Horse Forum

 

 

 

So, I made a couple dozen of these smaller versions.    They are all hand made and imperfect with poor paint.     I have about 15 left that I can  bring to the show.

 

 

 

So, I have one reserved or you Craig.

 

 

 

 Put me on the list for one Ed!! 

  Please and thank you 

[squonk 41,118]

 

Me too Ed Dog! 

[Pullstart 62,882]

Me three Ed Dog!

[Pullstart 62,882]

@WHX?? @Achto you want me to pick you guys up some from @Ed Kennell?

[Pullstart 62,882]

37 minutes ago, Sailman said:

Thanks to all the folks helping me get my parts together for the C-120. Just to confirm details...

@Pullstart you have the steering wheel and @rjg854 you have the hood. Still need the 1 piece belt guard (not attached to the footboard).

@WHX?? or @adsm08 do either have one you can bring to the big show?

Anybody providing parts message me if you need $$ for the parts.

@953 nut will be bringing parts back to Georgia for me

and HAPPY FATHERS DAY to all the Dads out there!

 

is this the belt guard you need?  It might need an engine tab made up for it, but otherwise looks intact.

[19richie66 17,508]

I’m in for one if you have enough @Ed Kennell

Edited June 16 by 19richie66

[Achto 27,576]

3 minutes ago, Pullstart said:

@WHX?? @Achto you want me to pick you guys up some from @Ed Kennell?

 

I would gladly take one. Thanks!! 

 

[Mike'sHorseBarn 2,998]

I'll take one @Ed Kennell!

[Pullstart 62,882]

15 minutes ago, Achto said:

 

I would gladly take one. Thanks!! 

 

It’ll be with Uncle Jim’s money so @Ed Kennell I’ll plan to pick 3 of them up from you if possible 

[Mike'sHorseBarn 2,998]

Hey @Pullstart put mine on @WHX?? tab too then 

[Sailman 1,291]

2 hours ago, Pullstart said:

is this the belt guard you need?  It might need an engine tab made up for it, but otherwise looks intact.

 

I was hoping to get one in better shape. I could probably weld the one I have easier than repairing this one but THANKS for the offer. I thought someone else had responded with a pretty good condition one but I can't seem to find that post now.

[whtractors24 3,116]

3 hours ago, Ed Kennell said:

Some of you may remember the Wooden Wheel Horse Head I made some years back.

 

My Wooden Horse. - non tractor related discussion - RedSquare Wheel Horse Forum

 

I have had requests but never had the time, or took the time, to make another one.

This  winter while being homebound taking care of Mrs K. I had time and needed an indoor project when @AMC RULES  PMed me requesting one.   Mrs K has been recovering from foot surgery and has been in a wheel chair for two

months.

 

So, I made a couple dozen of these smaller versions.    They are all hand made and imperfect with poor paint.     I have about 15 left that I can  bring to the show.

 

 

So, I have one reserved or you Craig.

 

 

 

Ed I will take one .

[Darrenw85 605]

Ed, 

I'll take one of the horses, 

 

Thanks,

Darren

[AMC RULES 37,130]

7 hours ago, Ed Kennell said:

 @AMC RULES

So, I have one reserved or you Craig.

Can't wait to see you again Ed. Ty buddy!

Hope the Mrs. K is on the mend and feeling much better now.

Edited June 16 by AMC RULES

[zigzag 127]

I'll take one too Ed if you have any left.