Pullstart 63,054 #226 Posted May 28 The wood bearing blocks are legit, or someone up here built one just like it! 1 1 Share this post Link to post Share on other sites
squonk 41,287 #227 Posted May 28 I had a disc with wood bearings also. Got stolen by the neighborhood druggie kids next door. 1 Share this post Link to post Share on other sites
Monstrosity 1,141 #228 Posted May 28 7 hours ago, 19richie66 said: Pull behind disc. Not sure of brand. Has wood blocks around the “axle” shafts between the discs. Not sure if this is the way it is supposed to be. I bought it a while back and probably will never use it. Will get better pics after I get it out of storage. $100obo Richie sent ya a message 1 1 Share this post Link to post Share on other sites
Cee245 818 #229 Posted May 29 (edited) 1993 314-8. Unknown true hours. Good shape. I put my spare deck on and mowed with it last week. Runs very good. -New oem head gasket, decarboned combustion chamber, adjusted valves, Cylinder wall is excellent! new synthetic oil, new tranny gear oil. new shift boot. Smooth trough all gears. Meter quit at 58. Have original meter. Currently has non original Meter on and it works, so wiring is good there. Non original meter say ~575 -Idiot lights do not work -One rear tire loses air after a week or two. 550 firm. Located in Erie, PA or can deliver to big show. Edited May 29 by Cee245 Add pics! 2 Share this post Link to post Share on other sites
Blasterdad 2,716 #230 Posted May 29 On 5/24/2024 at 7:59 PM, stevebo said: Another nice little mower I have had and used for fall leaf clean up for past 5 years. It runs and mows awesome! Only thing it will need is a battery. I charge it and it is good for a few days then goes dead. I will probably regret selling but just picked up 400 series with full bagger. need $350 for it delivered to big show! I'll take it, PM sent.... 1 Share this post Link to post Share on other sites
19richie66 17,522 #231 Posted May 30 D200 seat adjuster assembly. I have the spring somewhere. $30obo Share this post Link to post Share on other sites
WHX?? 49,100 #232 Posted May 30 11 hours ago, Blasterdad said: I'll take it, PM sent.... Yer gonna love that mower Blaster. Missus mows with one in 14 hp flavor and it does cut nice and excellent for fall leaves with that bagger. I'd been all over that for a backup if I was making the BS. He's giving it away. Share this post Link to post Share on other sites
Blasterdad 2,716 #233 Posted May 30 8 minutes ago, WHX?? said: Yer gonna love that mower Blaster. Missus mows with one in 14 hp flavor and it does cut nice and excellent for fall leaves with that bagger. I'd been all over that for a backup if I was making the BS. He's giving it away. I was going to get it for my son, perfect for fall clean up & I can have the C-81 I gave him back, ( almost feel naked without at least 4 of them ) 6 Share this post Link to post Share on other sites
parsonsponyz 123 #234 Posted May 30 Need to thin the herd so here's some offerings. Got these when I bought a wheel horse lot. Hopefully more to add later. Raider 9. Needs total restoration, rough but salvageable. Seat garden included. $135 Raider 10. Really rough, hood and seat is junk, moves and steers. Haven't tried to start. $100 Charger 12. Salvageable but rough. $135 2 1 Share this post Link to post Share on other sites
rjg854 11,451 #235 Posted May 30 (edited) For sale an original shape 1045. New carb and tie rods and a seat cover. It's rewired and runs good. Rebuilt transmission with some replacement gears, all new bearings and seals. $700 SOLD Also have some steering wheels. Off brand $10 This one is like the one I have on my 854 and the Raider $30 Edited May 30 by rjg854 Cor 2 1 Share this post Link to post Share on other sites
stevebo-(Moderator) 8,340 #236 Posted May 30 2 hours ago, rjg854 said: For sale an original shape 1045. New carb and tie rods and a seat cover. It's rewired and runs good. Rebuilt transmission with some replacement gears, all new bearings and seals. $700 Also have some steering wheels. Off brand $10 This one is like the ones I have on my 854 and the Raider $30 Pm sent 2 Share this post Link to post Share on other sites
Sparky-(Admin) 21,398 #237 Posted May 31 Came across this Parts & Service Manual while cleaning out garage stuff….FREE!! 88 pages of great info! I’ll be at the show from mid day Thursday till mid day Saturday. *SOLD* I still have this Oil Bath Air filter setup from a 1964 1054 with carb mounting screws for $40 brought to the show. *SOLD* 2 Share this post Link to post Share on other sites
squonk 41,287 #238 Posted May 31 (edited) Nice 60's mid hitch. $20 SOLD Edited May 31 by squonk 4 Share this post Link to post Share on other sites
WH1618speed 535 #239 Posted May 31 6-12 General branded ag tires. In great shape and cleaned up. Very little cracking if any. $50 1 1 Share this post Link to post Share on other sites
squonk 41,287 #240 Posted June 1 Can't edit old post. Frt. Ag's SOLD Share this post Link to post Share on other sites
Docwheelhorse 2,682 #241 Posted June 1 Evening all!! Yah im late to the party... But heres a few things I can bring... 2 Tub carts from 1960s... $150 obo each *SOLD* A C120 Special (auto / manual lift) Tecumseh 12... runs good, charges... I have a spare carb , a couple fuel pumps and a carb kit I’ll throw in---just gotta find them lol. Brand new 300 amp battery... no rot on deck, blades good. Not silent but not deafening / unuseable . Spare non blown up engine included. $550 obo. *SOLD * Stuff is for sale locally so if you want it speak up... Trades for Briggs and Stratton powered Wheel Horses considered Thanks Tony 860-978-9039 2 Share this post Link to post Share on other sites
76c12091520h 3,658 #242 Posted June 2 (edited) Seats , lots of seats . Milsco brand seats. All 7" x 7 1/2" bolt pattern. More info, better pics, and prices to follow. I'm tired from loading and unloading seats all afternoon and evening and I'm going to bed....... Edited June 2 by 76c12091520h 2 6 2 Share this post Link to post Share on other sites
Mike'sHorseBarn 3,013 #243 Posted June 2 10 hours ago, 76c12091520h said: Seats , lots of seats . And wouldn't ya know I'm in need of a couple lol 1 1 Share this post Link to post Share on other sites
19richie66 17,522 #244 Posted June 2 1 hour ago, Mike'sHorseBarn said: And wouldn't ya know I'm in need of a couple lol Yep. Could use one myself. Share this post Link to post Share on other sites
wallfish 17,075 #245 Posted June 2 1 hour ago, 19richie66 said: Yep. Could use one myself. Me three Share this post Link to post Share on other sites
squonk 41,287 #246 Posted June 2 (edited) Did someone say Seats? WH SEAT SOLD!! Edited June 2 by squonk 2 Share this post Link to post Share on other sites
Sodaking27 790 #247 Posted June 2 (edited) Few odds and ends. plow bracket $20, obo Sold to @Ed Kennell. 8” hub caps $40, obo. Few scratches etc. SOLD @Lane Ranger small fender pan. I’m not sure what this fits. Front bracket has been cut. $FREE.. SOLD to @ebinmaine Larger fender pan off of a Bronco 14. $FREE. I’ll be at the show mid day Thursday and Friday. Edited June 13 by Sodaking27 2 Share this post Link to post Share on other sites
ebinmaine 68,133 #248 Posted June 2 2 minutes ago, Sodaking27 said: small fender pan. I’m not sure what this fits. Front bracket has been cut. $FREE.. If @wallfish can meet up with you I'd be interested. He's looking for a few others for me. Share this post Link to post Share on other sites
Sodaking27 790 #249 Posted June 2 2 minutes ago, ebinmaine said: If @wallfish can meet up with you I'd be interested. He's looking for a few others for me. @ebinmaine It’s yours. 1 Share this post Link to post Share on other sites
PWL216 890 #250 Posted June 2 31 minutes ago, ebinmaine said: If @wallfish can meet up with you I'd be interested. He's looking for a few others for me. @ebinmaine I can pick this up for you as well. If there’s anything else that you buy that needs a ride home, I’ll be happy to help. 1 Share this post Link to post Share on other sites
.JPG.9f2ecb26065c66527b0730084ab7fc7a.thumb.jpg.7dc8a04d9a53d44ee2b23f26ee94496f.jpg)
