Cjwv1975 64 #1 Posted February 8 Picked up a used 75c160. The transmission dipstick doesnt fit good on it and has allowed water to get into it. Is there a replacement grommet or oring for the dipstick itself. The dipstick is in good shape just doesn't seal good. Thanks 1 Share this post Link to post Share on other sites
wallfish 16,994 #2 Posted February 8 (edited) The one I had trouble with was kinda like that. The rubber just wouldn't go into the tube right like it was swelled a bit or something. If that's what you have, I cured the problem by removing the plastic tube from the trans and using a step bit to ream some material off. Do just a little then test fit, little more each time. Rinse and repeat as necessary. Edited February 8 by wallfish 8 Share this post Link to post Share on other sites
ebinmaine 67,424 #3 Posted February 8 7 hours ago, Cjwv1975 said: Picked up a used 75c160. The transmission dipstick doesnt fit good on it and has ALLOWED WATER to get into it. We also find the shifter boot to be a big culprit here. Seems the vast majority of these tractors are stored outside for Large portions of their lives and the rain runs down the shifter right into the transmission. 4 1 Share this post Link to post Share on other sites
Cjwv1975 64 #4 Posted February 8 7 hours ago, ebinmaine said: We also find the shifter boot to be a big culprit here. Seems the vast majority of these tractors are stored outside for Large portions of their lives and the rain runs down the shifter right into the transmission. Yeah the boot was shot too. 2 Share this post Link to post Share on other sites
ebinmaine 67,424 #6 Posted February 9 Well done Joe. 2 Share this post Link to post Share on other sites
