Vinnie 6 #1 Posted February 5 I have a 416-8 tractor. Could anyone suggest best set up for a dual hitch set for a ball and pin set up. Thanks. Share this post Link to post Share on other sites
Ed Kennell 38,138 #3 Posted February 5 Heavy Duty Removable Receiver Hitch with Axle Mounting Hardware (do not have a #104659 bracket) for Wheel Horse - Wheel Horse Parts and More 6 Share this post Link to post Share on other sites
ebinmaine 67,424 #4 Posted February 5 I'd second that one above. 2 Share this post Link to post Share on other sites
TonyToro Jr. 1,415 #5 Posted February 5 I’d 3rd on the one above. 2 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,535 #6 Posted February 5 4th... I have two of them. Rock solid. 1 Share this post Link to post Share on other sites
TractorEd 633 #7 Posted February 5 (edited) In addition to the receiver mentioned above, one of my hitches that I use with it is similar to this: https://a.co/d/edVwBXQ You can also get other types by searching 3 in 1 ball hitch or multi use ball hitch or other similar terms. heres another idea: https://www.etrailer.com/Trailer-Hitch-Ball-Mount/Convert-A-Ball/CAB-6W.html?feed=npn&gad_source=1&gclid=CjwKCAiAq4KuBhA6EiwArMAw1KvjWqCcVtbgijlLKKZvFKVpa_ch-TCNCD_W46EvBMmlwymeOrcanhoC5TgQAvD_BwE Edited February 5 by TractorEd 1 Share this post Link to post Share on other sites
ebinmaine 67,424 #8 Posted February 5 6 minutes ago, TractorEd said: In addition to the receiver mentioned above, one of my hitches is similar to this: https://a.co/d/edVwBXQ You can also get other types by searching 3 in 1 ball hitch or multi use ball hitch or other similar terms. I like that because you can leave the ball attached while using the tab style. 1 Share this post Link to post Share on other sites
Handy Don 12,213 #9 Posted February 5 (edited) For the sleeve hitch users, this wasn’t hard to make... Trailer tongue weight keeps it down. We use it to move over-the-road utility trailers around for easier loading and parking. We flip it “tab hitch up” for the garden trailer to get the hitch height needed for the trailer to run level. Of course the drawbar is still usable as well, with the hitch fully lifted and a low tongue on the pulled implement. Edited February 5 by Handy Don 4 Share this post Link to post Share on other sites
