JCM 9,130 #26 Posted February 5 And I thought my 84 was rough. Contemplating on mine ? Good luck on yours Jim. Could be a real nice blackhood if you got a lot of love to give. 3 5 Share this post Link to post Share on other sites
953 nut 55,189 #27 Posted February 5 1 hour ago, oliver2-44 said: Interesting zoning addition of the cable hook down on the mule drive. Never seen it done but probably attached to the rocker shaft to lift a non-Wheel Horse snow plow. 2 Share this post Link to post Share on other sites
ebinmaine 67,424 #28 Posted February 5 28 minutes ago, JCM said: And I thought my 84 was rough. Contemplating on mine ? If you decide to rehome that thing Jim, keep me posted. The guy that we built a tractor for last fall is entertaining the thought of a second one..... 3 Share this post Link to post Share on other sites
WHX?? 48,814 #29 Posted February 5 (edited) 2 hours ago, oliver2-44 said: hook down on the mule drive. I asked him about that. What he rigged up to pull it out. I was looking for a winch under there! 2 hours ago, oliver2-44 said: I keep looking for a C with an Eaton Hydro for a mower tractor for my sons Not this one then Ollie.. Sundstrand. They went to Eatons late 1980 so this one is a early 80. The serial number shows up in the files so this one has been seen here before. Not sure on the hood paint will look today. Just assumed it was a repaint. Edited February 5 by WHX?? 2 Share this post Link to post Share on other sites
WHX?? 48,814 #30 Posted February 5 46 minutes ago, ebinmaine said: If you decide to rehome that thing Jim, keep me posted. Definitely getting rehomed once i get her presentable, running & drivring. I already have one. Mower at the cabin. One that @Pullstart brought over. This one steers very hard but haven't greased it yet. My other one steers like a lumber wagon too tho. Was that common to these girls? I did see on service note on this. 4 1 Share this post Link to post Share on other sites
Mike'sHorseBarn 2,998 #31 Posted February 5 54 minutes ago, ebinmaine said: If you decide to rehome that thing Jim, keep me posted. The guy that we built a tractor for last fall is entertaining the thought of a second one..... Hey @WHX?? does this mean I'm bringing 3 back from your place in the spring to go various places? LOL One for me, one for @953 nut and one for @ebinmaine? 1 5 Share this post Link to post Share on other sites
Pullstart 62,834 #32 Posted February 5 11 hours ago, jeremi3210 said: 12 hours ago, WHX?? said: So the PO... he commences to cleaning out the rest of his garage on us ... gives us this cute little 4 hp Briggs. Dan says we got a bro who has a boy that would love to get that running. Ain't that right @jeremi3210. Then throws in these HF dollies! What ya think @Jacob moll! Up for the challenge! I'd bet a hour and he'd have it running! An hour? slacker… 1 5 Share this post Link to post Share on other sites
ebinmaine 67,424 #33 Posted February 5 16 minutes ago, WHX?? said: This one steers very hard but haven't greased it yet. My other one steers like a lumber wagon too tho. Was that common to these girls? Get your steering good and tight with new adjustable tie rods and carefully check the tow in. 1 Share this post Link to post Share on other sites
WHX?? 48,814 #34 Posted February 5 (edited) 23 minutes ago, Mike'sHorseBarn said: Hey @WHX?? does this mean I'm bringing 3 back from your place in the spring to go various places? LOL One for me, one for @953 nut and one for @ebinmaine? Lol might be four if Richard still wants a 953 carcass. Bring a big trailer... we'll load ala Pullstart. ? @ebinmaine the carb plates are froze up solid. The choke freed up pretty easy but the throttle plate not so much. Is there a trick or just keep soaking? The whole air cleaner assembly has gone AWOL. Edited February 5 by WHX?? 2 Share this post Link to post Share on other sites
Pullstart 62,834 #35 Posted February 5 2 minutes ago, ebinmaine said: Get your steering good and tight with new adjustable tie rods and carefully check the tow in. Depending on how many captains are judging… anything is straight in Wisconsin! 5 Share this post Link to post Share on other sites
ebinmaine 67,424 #36 Posted February 5 16 minutes ago, WHX?? said: just keep soaking You should probably be able to put that in a Marvel Mystery Oil container for a week or so and have it come undone 1 1 Share this post Link to post Share on other sites
WHX?? 48,814 #37 Posted February 5 (edited) Our visit with Tom. Checked out his awesome machining equipment and his billet aluminum 701 dashes. Some nice 3-d ones too! I got a gas tank for the Amigo and Dan got one for his puller. Some nice motor mounts too. Picked up some goodies from Lowell. Since what is going on in his shop is top secret no pics but here is the tool cab I traded for. Me thinks he got the raw end of the deal. No Dan it does not fit where I wanted to put it. Yes Tom in our haste to hit the state line I forgot to hit the tri tip shop. Edited February 5 by WHX?? 5 1 Share this post Link to post Share on other sites
Mike'sHorseBarn 2,998 #38 Posted February 5 27 minutes ago, WHX?? said: Lol might be four if Richard still wants a 953 carcass. Bring a big trailer... we'll load ala Pullstart. I have a 16 footer and I'll bring the 3/4 ton pickup. I'm telling ya, if that Raider 14 is still in Michigan in the spring it's coming home with me 3 2 1 Share this post Link to post Share on other sites
WHX?? 48,814 #39 Posted February 5 6 minutes ago, Mike'sHorseBarn said: still in Michigan in the spring it's coming home with me Is it close to Kev ... have him put dibs on it. 68 69 Raiders getting hard to come by. Shoulda never sent mine off to die. Share this post Link to post Share on other sites
Mike'sHorseBarn 2,998 #40 Posted February 5 It's in Owosso Michigan. I don't know if that's close or not. Share this post Link to post Share on other sites
SylvanLakeWH 25,535 #41 Posted February 5 5 minutes ago, Mike'sHorseBarn said: It's in Owosso Michigan. I don't know if that's close or not. 90 miles due east... Share this post Link to post Share on other sites
squonk 41,068 #42 Posted February 5 1 hour ago, ebinmaine said: You should probably be able to put that in a Marvel Mystery Oil container for a week or so and have it come undone 50/50 mix of Marvel and Seafoam 3 1 Share this post Link to post Share on other sites
ebinmaine 67,424 #43 Posted February 5 1 hour ago, Mike'sHorseBarn said: Raider 14 1 hour ago, WHX?? said: 68 69 Raiders getting hard to come by. Engine swap or newer than 1970? Share this post Link to post Share on other sites
Mike'sHorseBarn 2,998 #44 Posted February 5 16 minutes ago, ebinmaine said: Engine swap or newer than 1970? It's newer than 70, probably a 72 if I had to guess 1 Share this post Link to post Share on other sites
ohiofarmer 3,265 #45 Posted February 5 Reminds me of the two Black Hoods I got plus a set of ags and a snow blade for two Benjamins. both were 14 HP shaker plates. the one that was cosmetically rough had the rebuilt engine. 2 Share this post Link to post Share on other sites
953 nut 55,189 #46 Posted February 5 7 hours ago, WHX?? said: This one steers very hard but haven't greased it yet. I had one that steered hard even when jacked up. Put a little heat on each end of the axle to liquify the crusty old grease and everything worked great. 7 hours ago, WHX?? said: 7 hours ago, Mike'sHorseBarn said: Lol might be four if Richard still wants a 953 carcass. Jim, I better pass on the 953 can't believe I just said that. I have more projects than I will ever finish and I will be putting the E-60 and Jay's tiller in the bed of my truck for the ride home from the Big Show, no trailer this year. 5 Share this post Link to post Share on other sites
WHX?? 48,814 #47 Posted February 5 (edited) 34 minutes ago, 953 nut said: Jim, I better pass on the 953 No problem I'm sure we'll find someone that can use it. More joy ... every magnet loose. What adhesive did we say is preferred? Edited February 5 by WHX?? 2 Share this post Link to post Share on other sites
JoeM 7,873 #48 Posted February 5 1 hour ago, WHX?? said: What adhesive did we say is preferred? I use JB Never had a failure. 1 1 1 Share this post Link to post Share on other sites
Pullstart 62,834 #49 Posted February 5 7 hours ago, Mike'sHorseBarn said: It's in Owosso Michigan. I don't know if that's close or not. 7 hours ago, SylvanLakeWH said: 90 miles due east... Just got home from almost passing there today! I was in Redford bringing my buddy to get his new truck! 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,535 #50 Posted February 5 2 hours ago, 953 nut said: I will be putting the E-60 and Jay's tiller in the bed of my truck for the ride home That 953 is singing to you... Happy to take the E-60 off your to do list, ya know, just so you don't have to change your name to "E60 nut"... Oh the unsolicited help you get when you least expect it... 5 Share this post Link to post Share on other sites
