Jump to content
953 nut

TRACTOR TRIVIA and other interesting stuff 1/20/2024

Recommended Posts

953 nut

The Nebraska Tractor Test Laboratory

 

 

The Nebraska Tractor Test Laboratory (NTTL) is a program operated by the University of Nebraska in accordance with Nebraska law to test the performance of agricultural equipment that is to be sold in the United States. The NTTL has operated since 1920 as the common standard reference for tractor performance in the United States.

Impetus for the Nebraska Tractor Test Act of 1919, or Nebraska Tractor Law, came from a Nebraska farmer, Wilmot F. Crozier, who had been disappointed with the performance of several tractors he had bought. One had been marketed as a Ford tractor, but the Ford Tractor Company of the time was completely unrelated to the Ford Motor Company, and its products were of poor quality. The new law was enacted to address problems of false advertising of tractor features and capabilities, requiring that all agricultural tractors sold in Nebraska must have their performance verified by three engineers. The laboratory was established in 1920 at the University of Nebraska as a central location for tractor testing. The first tractor to be tested at the NTTL was a Waterloo Boy, which passed the test.

 

1470955813_Nebraskatractortest.jpg.7f79b5307b2feec32cf17c1db0072315.jpg

  • Like 4
  • Excellent 3
  • Thanks 2

Share this post


Link to post
Share on other sites
 
ebinmaine

Very interesting 

Share this post


Link to post
Share on other sites
 
JoeM

that tractor dynamometer caught my eye and looked around a bit on the net. 

I went down the rabbit hole on this one and really didn't find out how it was made, Richard may expound on this later, IDK

But I found a whole bunch of interesting stuff. From gear selection testing, exhaust testing, and some vibration testing. All modern testing tho.

How about this location for a vibration test sensor? :unsure:

image.png.8011304406732778b9039504a38a3a8d.png

  • Haha 2

Share this post


Link to post
Share on other sites
 
953 nut

In the process of gathering information I did find a few more pictures of the early days of tractor testing. The BELT HORSEPOWER rating was done in the laboratory with a flat belt driving a dynamometer at a specified RPM as shown below. I presume that the cart being towed by a tractor in the picture in my post above was a ground driven dyno. but wasn't able to find any proof of that.

 Wilmot F. Crozier and Tractor Testing in Nebraska - History Nebraska

The Larsen Museum has a great deal of historical information on the Nebraska Tractor Test history. This visitors guide is a tractor trivia treasure chest. 

https://tractormuseum.unl.edu/larson-tractor-museum-visitors-guide

  • Like 3
  • Thanks 1

Share this post


Link to post
Share on other sites
 
8ntruck

Early tractors were rated for draw bar horsepower and belt horsepower.

 

Been a long time since I played with a brake dynamometer in the lab sessions for my thermodynamic class, so I'm working from deep in my memory.  Force, time, and distance need to be measured to determine horsepower.  

 

For the belt horsepower, the tractor is connected to an instrumented shaft with a brake to generate the data needed to calculate horsepower.

 

Draw bar horsepower data was measured with an instrumented wagon  with some sort of brake to load the tractor.  Notice the big lugged steel wheels on the right side of the picture.  I suspect that they were connected to a brake to supply the load.  There appear to be wires hooked up to some sort of box on the rear hubs of the tractor being tested - rpm sensor maybe?  I also suspect that there is some sort of calibrated spring built into the hitch between the dynamometer car and wagon to  tell how hard the tractor is pulling..

 

Soil conditions would introduce a bunch of variables in a rig like that.

 

  • Like 2

Share this post


Link to post
Share on other sites
 
953 nut
21 hours ago, 8ntruck said:

Soil conditions would introduce a bunch of variables in a rig like that.

:text-yeahthat:

It would be impossible to accurately measure the power exerted if the wheel on the dynamometer hasn't got good traction.

  • Like 1

Share this post


Link to post
Share on other sites
 
Horse Newbie

Great idea- to start testing tractors…

Probably squelched a lot of those outlandish claims concerning a certain brand of green and yellow tractors…

  • Excellent 1
  • Haha 2

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...