Retired Wrencher 5,451 #1 Posted December 16, 2023 I seen many in my time but not this greasy and oil/ and what else at 56 years old. So I have the time to do it right. I will clean every square inch. I had it all apart any way so I went one step further. Hope all of you have a great Holiday season. 11 1 Share this post Link to post Share on other sites
ri702bill 8,316 #2 Posted December 16, 2023 (edited) And just what model Kohler is sitting under the hood?? That one of those E-Lectic jobs ya use with a loooooong extension cord to cut the grass?? (and hopefully not the cord!) Funny looking pulley though..... Edited December 16, 2023 by ri702bill 7 Share this post Link to post Share on other sites
Retired Wrencher 5,451 #3 Posted December 16, 2023 (edited) The 3 minutes ago, ri702bill said: And just what model Kohler is sitting on the frame?? That one of those E-Lectic jobs ya use with a loooooong extension cord to cut the grass?? (and hopefully not the cord!) Funny looking pulley though..... LOL on that! Edited December 16, 2023 by Retired Wrencher 1 Share this post Link to post Share on other sites
CCW 1,295 #4 Posted December 16, 2023 I'm guessing a trailer with enough batteries and an inverter to avoid the extension cord. 1 Share this post Link to post Share on other sites
oliver2-44 9,739 #5 Posted December 16, 2023 (edited) Some of that might take a couple of trips through the pressure washer and parts cleaner. While it's out of our hobbyist price range, a Dry Ice blaster would freshen that right up. Edited December 16, 2023 by oliver2-44 2 Share this post Link to post Share on other sites
rjg854 11,360 #6 Posted December 16, 2023 (edited) With that much greasy dirt on it, at least it shouldn't be too rusty. Edited December 16, 2023 by rjg854 Sp 1 2 Share this post Link to post Share on other sites
23 Reo 229 #7 Posted December 16, 2023 That's not dirt it's rust proofing and paint protection. Leave it be. 3 Share this post Link to post Share on other sites
Retired Wrencher 5,451 #8 Posted December 17, 2023 15 hours ago, oliver2-44 said: Some of that might take a couple of trips through the pressure washer and parts cleaner. While it's out of our hobbyist price range, a Dry Ice blaster would freshen that right up. This is my winter into spring into summer project. I clean with just gas and rags and big parts brushes. Been doing this way since the beginning. I recycle all rags. 1 Share this post Link to post Share on other sites
Retired Wrencher 5,451 #9 Posted December 17, 2023 12 hours ago, 23 Reo said: That's not dirt it's rust proofing and paint protection. Leave it be. I do not leave anything out side so is not a problem. 1 Share this post Link to post Share on other sites