craftsman snow blower on 268-h

[tbcutter33 5]

a buddy has a 268=h. i was wondering if he could put a craftsman 2 stage on it? thanks in advance

[Ed Kennell 38,145]

to the      I am not familiar with either of these items. but anything is possible if you have the tools to weld and fabricate.

[ebinmaine 67,433]

Any chance we could get some pictures of the snow blower?

[tbcutter33 5]

no pics just wondering if any of the many 42 inch blowers from craftsman would be able to fit.

 

[ebinmaine 67,433]

2 minutes ago, tbcutter33 said:

no pics just wondering if any of the many 42 inch blowers from craftsman would be able to fit.

 

DIRECT bolt on will be unlikely but brackets and drive could be fabricated for many different things.

 

 

[Ed Kennell 38,145]

Just now, tbcutter33 said:

no pics just wondering if any of the many 42 inch blowers from craftsman would be able to fit.

 

It is very unlikely that any Craftsman blower would mount to a Wheel Horse without major modifications.

[tbcutter33 5]

thanks guy's. 

[tbcutter33 5]

5 minutes ago, Ed Kennell said:

It is very unlikely that any Craftsman blower would mount to a Wheel Horse without major modifications.

thanks i figured as much, 

[squonk 41,071]

I put an early 60's Simplicity /Allis-Chalmers blower designed for a horizontal engine on a 1990 WH 210-H with a vertical shaft Briggs. Worked pretty good! 

[tbcutter33 5]

13 hours ago, squonk said:

I put an early 60's Simplicity /Allis-Chalmers blower designed for a horizontal engine on a 1990 WH 210-H with a vertical shaft Briggs. Worked pretty good! 

thanks for answering.pretty interesting.