Branching Out……..

[Bow_Extreme 544]

Well, this is a first.  Couldn’t resist the selectable 4wd, 26” rear tires, power steering, and heavier front end loader.  Also, much bigger tractor than the wheel horse. 

[WHX?? 48,820]

Didn't know Simplecity had a SCUT in 4wd.

Looks to be a hi- test rig.

Turf tires tho? 

[Bow_Extreme 544]

6 hours ago, WHX?? said:

Didn't know Simplecity had a SCUT in 4wd.

Looks to be a hi- test rig.

Turf tires tho? 

Tires will be upgraded.  Looking at building 15” rear wheels for this and installing 29” Tru-Powers.  Then throw a larger set of AG’s on the front.

[Pullstart 62,900]

Looks cool Matt!

[953 nut 55,251]

Very nice lookin unit. With the weight box that far from the rear axle you can probably pop a wheelie if it's loaded up all the way.     

Edited December 5, 2023 by 953 nut
fat finger

[Bow_Extreme 544]

1 hour ago, 953 nut said:

Very nice lookin unit. With the weight box that far from the rear axle you can probably pop a wheelie if it's loaded up all the way.     

I haven’t yet.  That’s a factory weight box.  They do have a factory suit case weight bar bracket that’s available.  It’s closer to the tractor.  I’ve been tempted to purchase this and the weights.  

[peter lena 8,631]

@Bow_Extreme  think I would shorten that weight box , support / base , the extreme weight LEVERAGE  of that set up , will probably add to related stress cracking . also when you consider the front wheel size / set up , related bearings , spindle set  up , pete

[WHX?? 48,820]

7 hours ago, Bow_Extreme said:

Tires will be upgraded.  Looking at building 15” rear wheels for this and installing 29” Tru-Powers.  Then throw a larger set of AG’s on the front.

Good ideas... Give more ground clearance fer sure.