Corn Head Grease in Unidrive

[RED-Z06 2,254]

Ive heard so much good about the stuff being used in so many applications, it repels and doesn't emulsify with water, its a grease until it starts moving then its like a heavy oil..

 

Wonder if it would work in a unidrive?

[ebinmaine 68,554]

2 minutes ago, RED-Z06 said:

grease until it starts moving then its like a heavy oil.

Would it be capable of splash lubing upper gears that may not be in the oil bath?

 

[peter lena 8,779]

@RED-Z06  https://www.redpowermagazine.com/forums/topic/107709-corn-head-grease-in-haybine-gearbox/  JUST SNOOPIN AROUND  , PETE

[SylvanLakeWH 26,003]

[TonyToro Jr. 1,630]

5 minutes ago, SylvanLakeWH said:

always trying to find new oil/grease to use in the pulling tractors to creative less resistance as posible.

[RED-Z06 2,254]

1 hour ago, ebinmaine said:

Would it be capable of splash lubing upper gears that may not be in the oil bath?

 

Im not sure, it seems like its an excellent climbing lube for staying on gears, my only concern really is would it get the axle bearings.

 

https://youtu.be/7zNhli-J0Gk?si=8CBXe-Cl3-AOmDLN

[squonk 41,474]

I bet it would be a bear in cold weather. Let the clutch out and engine goes BLEAH! 

[pfrederi 17,912]

I use corn head in my Brush hog.  It is a lot more expensive than good old 90w

[953 nut 55,960]

Several years ago a fellow had a Unidrive with a plexiglass window in the top of it. It was operated by an electric motor and running rather slowly but the 90 weight gear oil was slinging all over the place. I would be afraid the Corn Head wouldn't get to the upper gears and the outer axle bearings.