Joe leonardo 164 #126 Posted December 13, 2023 Just now, Achto said: Take good measurements before welding the holes shut so you know exactly where to drill the new holes. 👌 2 Share this post Link to post Share on other sites
Joe leonardo 164 #127 Posted January 6 They tricked me 2 Share this post Link to post Share on other sites
ebinmaine 67,432 #128 Posted January 6 16 minutes ago, Joe leonardo said: They tricked me How so? Share this post Link to post Share on other sites
Joe leonardo 164 #129 Posted January 6 On 12/7/2023 at 5:04 PM, Joe leonardo said: I tried to bring up getting a decal kit for Christmas in conversation, that was a quick no , 5 Share this post Link to post Share on other sites
Digger 66 3,478 #130 Posted January 6 On 11/23/2023 at 6:34 PM, oliver2-44 said: Interesting large Hit & Miss Engine in front of it. Yes ! Would love to see some more pics of that baby ! Share this post Link to post Share on other sites
Joe leonardo 164 #131 Posted January 9 Do you guys know where these stickers go on the tractor? 1 Share this post Link to post Share on other sites
Ed Kennell 38,145 #132 Posted January 9 4 minutes ago, Joe leonardo said: Do you guys know where these stickers go on the tractor? @Vinylguy ??? Share this post Link to post Share on other sites
TonyToro Jr. 1,415 #133 Posted January 10 On 1/9/2024 at 1:31 PM, Joe leonardo said: Do you guys know where these stickers go on the tractor? I’m pretty sure the silver/crome one goes in the center on the back of the rear fender. Correct me if I’m wrong. 1 1 Share this post Link to post Share on other sites
davem1111 2,030 #134 Posted January 10 On 1/5/2024 at 8:32 PM, Joe leonardo said: They tricked me On 1/5/2024 at 8:48 PM, ebinmaine said: How so? Took me a few minutes, but I think he meant "they (family) tricked him about it being a 'no'" . Not that @Vinylguy Midwest Custom Graphics/redoyourhorse tricked him. I think he got exactly what he wanted. 2 1 Share this post Link to post Share on other sites
ebinmaine 67,432 #135 Posted January 10 24 minutes ago, davem1111 said: Took me a few minutes, but I think he meant "they (family) tricked him about it being a 'no'" . Not that @Vinylguy Midwest Custom Graphics/redoyourhorse tricked him. I think he got exactly what he wanted. Agreed. 1 hour ago, TonyToro Jr. said: I’m pretty sure the silver/crome one goes in the center on the back of the rear fender. Correct me if I’m wrong. Agreed there too. Methinks the larger one that looks like faux wood is for the headlamp block out plate for tractors without headlamps. 1 Share this post Link to post Share on other sites
Tonytoro416 1,034 #136 Posted January 11 For sure where the decals belong Share this post Link to post Share on other sites
D_Mac 8,607 #137 Posted January 11 Correct on the decal placement. Bad photos but you get the idea. The front where headlights would go and on the back fender under seat pan. 1 1 Share this post Link to post Share on other sites
Joe leonardo 164 #138 Posted January 11 20 hours ago, ebinmaine said: Agreed. Agreed there too. Methinks the larger one that looks like faux wood is for the headlamp block out plate for tractors without headlamps. Ok well due to me being cool I have headlights so I'll set it aside also I put the hood stickers on 2 1 Share this post Link to post Share on other sites
Joe leonardo 164 #139 Posted January 11 Ok so I took the dash face off and could you guy tell me if it's been hacked? Also how do I remove the steering wheel? Share this post Link to post Share on other sites
pfrederi 17,729 #140 Posted January 11 Push the roll pin out and lift off the wheel. Steering wheel removal is a right of passage with wheel horses. Lots of threads here on various methods....almost always involving blood sweat tears and cursing... To start get a true quality 1/4" roll pin punch 2 1 4 Share this post Link to post Share on other sites
Joe leonardo 164 #141 Posted January 11 10 minutes ago, pfrederi said: Push the roll pin out and lift off the wheel. Steering wheel removal is a right of passage with wheel horses. Lots of threads here on various methods....almost always involving blood sweat tears and cursing... To start get a true quality 1/4" roll pin punch That's sounds great 🙁 1 Share this post Link to post Share on other sites
Ed Kennell 38,145 #142 Posted January 11 31 minutes ago, Joe leonardo said: how do I remove the steering wheel? 1 4 Share this post Link to post Share on other sites
953 nut 55,193 #143 Posted January 13 On 1/11/2024 at 2:25 PM, Joe leonardo said: Ok so I took the dash face off and could you guy tell me if it's been hacked? Also how do I remove the steering wheel? Dash plate should look like this one on Jim's @WHX??. Looks like the spot where the lighter went has been altered. 1 Share this post Link to post Share on other sites
Joe leonardo 164 #144 Posted January 15 (edited) On 1/13/2024 at 5:05 AM, 953 nut said: Dash plate should look like this one on Jim's @WHX??. Looks like the spot where the lighter went has been altered. I wish the dude who owned it before me left it alone 🥲 Edited January 15 by Joe leonardo 1 Share this post Link to post Share on other sites
ebinmaine 67,432 #145 Posted January 15 2 hours ago, Joe leonardo said: I wish the dude who owned it before me left it alone 🥲 No worries. Could have been a combination of several owners too. These machines are 40 to 70 years old now. Some have had easy existences, others not so much. Share this post Link to post Share on other sites
rjg854 11,360 #146 Posted January 15 2 hours ago, Joe leonardo said: I wish the dude who owned it before me left it alone 🥲 A-Z tractor might be able to hook you up with a new dash plate Share this post Link to post Share on other sites
Joe leonardo 164 #147 Posted January 22 (edited) On 1/15/2024 at 2:03 PM, rjg854 said: A-Z tractor might be able to hook you up with a new dash plate I'd love to unfortunately I'm a wee baby and they only use PayPal which requires you to be 18 Edited January 22 by Joe leonardo 2 Share this post Link to post Share on other sites
Joe leonardo 164 #148 Posted January 24 Anybody have a photo of what a 1968 charger/raider dash looks like? Share this post Link to post Share on other sites
Handy Don 12,214 #149 Posted January 24 15 minutes ago, Joe leonardo said: Anybody have a photo of what a 1968 charger/raider dash looks like? Have you done a search of this site's files section for the Owners manual? Lots good stuff there makes it worth learning how. Search for “Tractor 1968 Charger” and be sure to set the option for “Use all my search terms" Share this post Link to post Share on other sites
Joe leonardo 164 #150 Posted January 25 49 minutes ago, Handy Don said: Have you done a search of this site's files section for the Owners manual? Lots good stuff there makes it worth learning how. Search for “Tractor 1968 Charger” and be sure to set the option for “Use all my search terms" I have been but I can't find a photo of how the dash is set up Share this post Link to post Share on other sites
