Joe leonardo 164 #76 Posted December 5, 2023 4 hours ago, ebinmaine said: Not dying is a good goal. Always remember that the fumes from gasoline are FAR MORE DANGEROUS than the liquid itself. You may want to just get another tank. I called it was only $30 bucks so I bought it 6 Share this post Link to post Share on other sites
953 nut 55,194 #77 Posted December 6, 2023 3 hours ago, Joe leonardo said: I know about 15x more than my shop teacher 😂 I knew it all when I was a teenager too, then reality sank in and discovered I had a lot to learn. 1 3 1 Share this post Link to post Share on other sites
ebinmaine 67,438 #78 Posted December 6, 2023 1 hour ago, Joe leonardo said: I called it was only $30 bucks so I bought it Excellent 1 Share this post Link to post Share on other sites
Joe leonardo 164 #79 Posted December 6, 2023 24 minutes ago, 953 nut said: I knew it all when I was a teenager too, then reality sank in and discovered I had a lot to learn. I've been doing it sense I was in middle school I'm a veteran flashlight holder 1 3 Share this post Link to post Share on other sites
Joe leonardo 164 #80 Posted December 6, 2023 I just realized mine doesn't have the foot brake 2 Share this post Link to post Share on other sites
ebinmaine 67,438 #81 Posted December 6, 2023 3 hours ago, Joe leonardo said: I just realized mine doesn't have the foot brake You would have a single pedal on the left. You don't appear to have the lift mechanism either. 1 Share this post Link to post Share on other sites
Joe leonardo 164 #82 Posted December 6, 2023 I'm going to sand and paint the hood today I got some rust olium regal red 1 3 Share this post Link to post Share on other sites
Joe leonardo 164 #83 Posted December 7, 2023 The hood is primered I'm gonna paint it tomorrow, also found out it does in fact not have any of the brake linkage so I got a source that also the left foot rest is completely hacked out so I need to find a new one. I found one on eBay for 10 bucks but the guy hasn't gotten back to me 3 Share this post Link to post Share on other sites
ebinmaine 67,438 #84 Posted December 7, 2023 Did the Redsquare vendors have any of those parts? 1 Share this post Link to post Share on other sites
Joe leonardo 164 #85 Posted December 7, 2023 6 hours ago, ebinmaine said: Did the Redsquare vendors have any of those parts? I haven't checked 1 Share this post Link to post Share on other sites
Joe leonardo 164 #86 Posted December 7, 2023 I need to save some money I bought a few things and they should be plenty for what I need 1 Share this post Link to post Share on other sites
953 nut 55,194 #87 Posted December 7, 2023 7 hours ago, Joe leonardo said: I need to save some money I bought a few things and they should be plenty for what I need Christmas is right around the corner, never know what you could get. 1 Share this post Link to post Share on other sites
Joe leonardo 164 #88 Posted December 8, 2023 8 minutes ago, 953 nut said: Christmas is right around the corner, never know what you could get. Nah my dad hates that little tractor 3 6 Share this post Link to post Share on other sites
Joe leonardo 164 #89 Posted December 8, 2023 (edited) I tried to bring up getting a decal kit for Christmas in conversation, that was a quick no Edited December 8, 2023 by Joe leonardo 1 5 Share this post Link to post Share on other sites
ebinmaine 67,438 #90 Posted December 8, 2023 Not everyone likes or appreciates the same things. Perhaps when you've got the tractor up n running it'll be more evident what its capabilities are. 6 Share this post Link to post Share on other sites
Joe leonardo 164 #91 Posted December 8, 2023 2 minutes ago, ebinmaine said: Not everyone likes or appreciates the same things. Perhaps when you've got the tractor up n running it'll be more evident what its capabilities are. Im restoring a John Deere A in my back yard and they think the wheel horse is gonna take my attention away from getting the Deere done even thought the WH is a school project, yet when I ask to paint the Deere (it's tore down in primer) they say no 🥲 2 Share this post Link to post Share on other sites
Joe leonardo 164 #92 Posted December 8, 2023 It's fine I have the forum for help 💪 4 1 Share this post Link to post Share on other sites
davem1111 2,030 #93 Posted December 8, 2023 On 12/6/2023 at 1:13 PM, Joe leonardo said: I'm going to sand and paint the hood today I got some rust olium regal red That's what I've been using on mine. Rural King here didn't have any for a while - I was glad I had bought 4 or 5 cans when they did. 2 Share this post Link to post Share on other sites
Achto 27,565 #94 Posted December 8, 2023 (edited) On 12/6/2023 at 10:40 PM, Joe leonardo said: also found out it does in fact not have any of the brake linkage so I got a source There is no mechanical brake on a Charger. When you step on the clutch peddle it only returns the hydro lever to the neutral position which causes the tractor to stop. Edited December 12, 2023 by Achto 1 Share this post Link to post Share on other sites
Joe leonardo 164 #95 Posted December 8, 2023 1 minute ago, Achto said: There is no mechanical brake on a Raider. When you step on the clutch peddle it only returns the hydro lever to the neutral position which causes the tractor to stop. I know I checked it out, but it's all not there 2 Share this post Link to post Share on other sites
Horse Newbie 7,069 #96 Posted December 8, 2023 @Joe leonardo, Just a thought… I have found the more pics I post of what I am doing does two things… 1. Peaks members interest in what I am doing. 2. Helps members understand what I am talking about. 3. Shows members what I am talking about. I have found that pics also help members educate me on the proper terminology for what I am talking about. Sometimes I may call something something different than they do, and that is fine, but a pic helps clarify what we may be talking about. Besides… 3 1 Share this post Link to post Share on other sites
Joe leonardo 164 #97 Posted December 8, 2023 (edited) 48 minutes ago, Horse Newbie said: @Joe leonardo, Just a thought… I have found the more pics I post of what I am doing does two things… 1. Peaks members interest in what I am doing. 2. Helps members understand what I am talking about. 3. Shows members what I am talking about. I have found that pics also help members educate me on the proper terminology for what I am talking about. Sometimes I may call something something different than they do, and that is fine, but a pic helps clarify what we may be talking about. Besides… Ok come Monday I'll get some I even got it it's own little home in the corner of the shop and an oil stain on the concrete that will be there forever Edited December 8, 2023 by Joe leonardo 1 5 Share this post Link to post Share on other sites
Joe leonardo 164 #98 Posted December 10, 2023 Is this the same tranny cam for my tractor, it says it's for a gt 1 1 Share this post Link to post Share on other sites
Joe leonardo 164 #100 Posted December 12, 2023 I got the hood on and it doesn't match up what so ever, anyone know if the hood is wrong Share this post Link to post Share on other sites