chalky493@yahoo.com 10 #1 Posted November 18, 2023 Got a B80 with a 36" deck, got one spindle off. Now how does this come apart? Does it hammer down to the blade end or up to the pulley end, Or does it matter?Thanks Share this post Link to post Share on other sites
daveoman1966 3,752 #2 Posted November 18, 2023 Presuming you have the 'Double D' spindle assembly, the bearing (#103119) MUST be driven out from the blade side of the spindle. There is a right and wrong way to do this. DO NOT 'hammer in the new bearing---but PRESS it in with force on the outer rim of the 103119 bearing...NOT THE SHAFT!. 2 Share this post Link to post Share on other sites
elcamino/wheelhorse 9,306 #3 Posted November 21, 2023 @daveoman1966 Have you ever posted a copy of those assembly instruction on the forum ? If not could you post them it would be very helpful. Thanks Share this post Link to post Share on other sites
daveoman1966 3,752 #4 Posted November 21, 2023 Not sure where you would want me to post them in Red Square, but knock yoerself out... just copy/paste them. Share this post Link to post Share on other sites
