GT1800 Hydro refresh for our friends!

[ebinmaine 67,502]

The headlight bezels had some overspray. Both black and gray. 

 

A bit of scrubbing took care of that.  

 

 

[Pullstart 62,882]

EB.  Is this going to be a grey and black, or red and grey, or custom paint work horse?

[ebinmaine 67,502]

1 minute ago, Pullstart said:

custom paint work horse

The red you see is a Wheel Horse color. 

It's the maroon used late 80s, early 90s maybe?

 

 

This one will be maroon hood, seat pan, and side covers. The rest ((??)) Probably black but I didn't ask...

 

[c-series don 8,707]

 @ebinmaine Are we going to see Work Horse decals on this new paint? 

[ebinmaine 67,502]

58 minutes ago, c-series don said:

 @ebinmaine Are we going to see Work Horse decals on this new paint? 

Not this fall, but maybe later. 

Gotta let the paint cure for a few months.  

 

[ebinmaine 67,502]

The Paint Department was busy as usual today.  

 

Washing sanding spraying etc...

 

Side steps are all that's left to make maroon.  

 

 

[ebinmaine 67,502]

[Horse Newbie 7,069]

2 hours ago, ebinmaine said:

What color did the paint department use for the black ?

[ebinmaine 67,502]

57 minutes ago, Horse Newbie said:

What color did the paint department use for the black ?

 

That's Rust-Oleum 2X Satin Black

[Handy Don 12,232]

I accidentally pained my rubber hood hold-downs, too!

[ebinmaine 67,502]

56 minutes ago, Handy Don said:

I accidentally pained my rubber hood hold-downs, too!

I'd bet it wasn't an accident in this case. 

 

She's just trying to get it prettierified for the new owners. 

If they want it restored properly later we'll take more care in painting or get another hood.   

 

 

[Horse Newbie 7,069]

1 hour ago, ebinmaine said:

 

That's Rust-Oleum 2X Satin Black

That’s what I used on the grilles on my horses…

[ebinmaine 67,502]

How do I find an air filter for this engine? 

[Horse Newbie 7,069]

7 hours ago, ebinmaine said:

How do I find an air filter for this engine? 

Isn’t that a Briggs ?

 

I wonder if an 18 and a 16 hp opposed Briggs would use the same filter ? 

[ebinmaine 67,502]

12 minutes ago, Horse Newbie said:

Isn’t that a Briggs ?

 

I wonder if an 18 and a 16 hp opposed Briggs would use the same filter ? 

 

Maybe 🤔

 

I don't have an old filter element.

 

[Horse Newbie 7,069]

6 minutes ago, ebinmaine said:

 

Maybe 🤔

 

I don't have an old filter element.

 

Do you want me to measure the filter and pre cleaner on my Work Horse’s 16 hp opossed twin tomorrow and give you some dimensions ?…

Maybe you can take those dimensions and figure out if the same filter would fit yours.

No name stamped in the engine shroud, engine I.d.  Tag ?

[c-series don 8,707]

@ebinmaine I’ll check my manuals in the morning to see if I can get a filter and pre filter for number for you. 

[sjoemie himself 3,068]

 

49 minutes ago, ebinmaine said:

don't have an old filter element

Do you have the number of the engine? 

Most of the time It's located on the cilinder cooling shroud. 

If you have the Briggs engine number it's pretty straightforward to look up the correct filter parts.

 

This is what went on my opposed twin not too long ago.

 

[Bill D 1,921]

 I think it's the same filter used on some Vanguard Engine models.  It may be available at TSC, possibly Lowe's or Home Depot too.

[ebinmaine 67,502]

14 hours ago, Horse Newbie said:

Do you want me to measure the filter and pre cleaner on my Work Horse’s 16 hp opossed twin tomorrow and give you some dimensions ?…

Maybe you can take those dimensions and figure out if the same filter would fit yours.

No name stamped in the engine shroud, engine I.d.  Tag ?

 

If it's not a pain I'd be curious to know what you have. 

 

I'll double check the engine shrouds. I don't recall a usable number.   

 

 

[Horse Newbie 7,069]

7 hours ago, ebinmaine said:

 

If it's not a pain I'd be curious to know what you have. 

 

I'll double check the engine shrouds. I don't recall a usable number.   

 

 

@ebinmaine ,

On my 16 hp Briggs opposed, I used a NAPA GOLD 2359.

approx. 7 inches outside dia.

approx. 2-1/4 tall

 

I forgot to get the inside diameter. Do you want me to get it for you ?

Edited October 21, 2023 by Horse Newbie

[ebinmaine 67,502]

15 minutes ago, Horse Newbie said:

forgot to get the inside diameter. Do you want me to get it for you ?

No worries there. 

Lemme check the base and lid to see if there's any old impressions of the filter elements.  

 

[Bill D 1,921]

Hope these pictures help.  Engine numbers should be stamped in the tins covering the #1 cylinder.  If you can't find your numbers these numbers should help you get the parts you need.  422457 are the first six numbers that are difficult to read.

Edited October 22, 2023 by Bill D

[ebinmaine 67,502]

On 10/21/2023 at 2:58 PM, Horse Newbie said:

On my 16 hp Briggs opposed, I used a NAPA GOLD 2359.

approx. 7 inches outside dia.

approx. 2-1/4 tall

 

Looks like this one would be right!

 

 

 

 

 

@Bill D

I did find the engine numbers on the shroud.  

 

 

 

[ebinmaine 67,502]

More parts sanded and painted.