Building an Off road Mower

[ebinmaine 67,502]

10 hours ago, BairleaFarm said:

I have decided to retire this wreck and dedicate it to being a parts machine.   

 

 

 

Not the easiest decision after putting work into things sometimes.  

 

If you like the body style of that older one better than the 400 500 you could potentially swap engines and other parts.  Maybe repair the hood.  

 

[BairleaFarm 340]

12 hours ago, ebinmaine said:

 

Not the easiest decision after putting work into things sometimes.  

 

If you like the body style of that older one better than the 400 500 you could potentially swap engines and other parts.  Maybe repair the hood.  

 

 Oh I'm doing a 416 platform with a 520 dash tower and a 6 slotted hood.    It's gonna be awesome or complete crap.  

[Wild Bill 633 846]

Have you determined the root cause of the accident? Possibly a combination of going to fast with sloppy steering with a high center of gravity? Kind of like a farm wagon swerving back and forth while being towed? This was one of the concerns I had while designing my build and opted for a rack and pinion steering.

[BairleaFarm 340]

1 hour ago, Wild Bill 633 said:

Have you determined the root cause of the accident?

 

 

I was going up hill the rear tires caught and it rolled back on its self before I could shut it down.   I had been dealing with clutch issues. 

[ebinmaine 67,502]

1 minute ago, BairleaFarm said:

dealing with clutch issues. 

Hence the appeal of the "two pedal" tractors for me.  

You'll like that separate brake. 

[BairleaFarm 340]

1 minute ago, ebinmaine said:

You'll like that separate brake. 

 

I already do.  I didnt know it was even and option until I got the 416 lol

[ebinmaine 67,502]

15 minutes ago, BairleaFarm said:

 

I already do.  I didnt know it was even and option until I got the 416 lol

 

I don't know what the cut off is on the year that began.

I know from 74 up all the B and C Series had two pedals.

I think it started a little earlier than that on some other models though.

 

[sjoemie himself 3,068]

On 11/8/2023 at 11:09 PM, BairleaFarm said:

Ripped the motor from the frame 

 

Is that cast iron? Should be easy enough to weld or braze. 

[BairleaFarm 340]

WRONG THREAD

 

Edited November 20, 2023 by BairleaFarm
WRONG THREAD

[BairleaFarm 340]

WRONG THREAD

 

Edited November 20, 2023 by BairleaFarm
WRONG THREAD

[BairleaFarm 340]

WRONG THREAD

Edited November 20, 2023 by BairleaFarm
WRONG THREAD

[Pullstart 62,882]

I don’t know… I think they say “you do you” these days.  I can’t see improvement on the looks, but that’s just me.  I have a lot of crazy ideas that appeal to me and me alone.