“New” 76 or 77 B80

[AHS 1,440]

I got a Wheelhorse for $50!!!!! A B80, its an 8 speed…. so it must a 76 or a 77? 71-08k801 14413 and the number below it is 7094… i think!! All factory wiring and coil. It looks like the PTO seal is bad..oil all over the place! We’ll see once i get it running!! I changed the oil and gas came running out.. cute!! Hopefully clean the carb, set the points and new fuel line/filter.. and it’ll be a runner!!!

[Racinbob 11,058]

The 71 prefix indicates it's a 77. 76's and 77's are identical though. The B series and C series Are identical in those two years save for some cosmetic items and HP. Here's my 76 B-80 that I purchased new and still have it. It grew into a "B"-160. 

 

[ebinmaine 67,443]

I'm really happy to see you got that!

Now that machine can be maintained like it should be and put to work. 

You'd really like the little 8 HP engine. 

Economical and powerful for its size.  

 

That's a... uhhh... nice seat ((??))

 

 

[AHS 1,440]

40 minutes ago, ebinmaine said:

I'm really happy to see you got that!

Now that machine can be maintained like it should be and put to work. 

You'd really like the little 8 HP engine. 

Economical and powerful for its size.  

 

That's a... uhhh... nice seat ((??))

 

 

Ya.. the seats gonna be the most expensive item!!

[ebinmaine 67,443]

4 minutes ago, AHS said:

Ya.. the seats gonna be the most expensive item!!

You might be able to find a decent used one?

 

[Sparky-(Admin) 21,315]

The B-80’s are great rigs. I work mine and take it to shows. 
  

 

[J854D 137]

@AHS, the 7094 number in your serial number is the Julian date of manufacture. Meaning your B80 was built on the 94th day of 1977. (Monday April 4, 1977). -JD-

[Retired Wrencher 5,451]

I have one for plow duty. Most the time it just sits in the garage. Like Mike said hard to beat these K181`s.

 

[Moparfanforever 844]

LB for LB ,the 8HP Kohler is hard to beat !!

[AHS 1,440]

6 hours ago, J854D said:

@AHS, the 7094 number in your serial number is the Julian date of manufacture. Meaning your B80 was built on the 94th day of 1977. (Monday April 4, 1977). -JD-

Oh! Now i know when the B80s birthday is!!

[AHS 1,440]

Ok, I drained the oil…gas in the oil. A lot of gas! The gas tank is completely dry… what if the needle was stuck open and drained into the base? I changed the oil. I cleaned the points and replaced the spark plug and sprayed starting fluid into the carb..and it did run!! Now to take off the carb. I guess i will see what the carb holds!! 

[ebinmaine 67,443]

21 minutes ago, AHS said:

Ok, I drained the oil…gas in the oil. A lot of gas! The gas tank is completely dry… what if the needle was stuck open and drained into the base? I changed the oil. I cleaned the points and replaced the spark plug and sprayed starting fluid into the carb..and it did run!! Now to take off the carb. I guess i will see what the carb holds!! 

 

 

Quick rebuild kit in that carb and also check the fuel pump.  

 

 

[AHS 1,440]

7 hours ago, Retired Wrencher said:

I have one for plow duty. Most the time it just sits in the garage. Like Mike said hard to beat these K181`s.

 

I had a 76 B80, mine was for plow duty. It boggles my mind how the K181’s would work!! AND even use such little gas!! I sold the 76 to a friend, he and the tractor only live about a mile from me. I got rid of my 76 in May ‘23 and i got a 77 B80 in October! 

[rjg854 11,360]

I'm with Eric, check that fuel pump. A leaking diaphragm is how gas gets into the crankcase.

[AHS 1,440]

1 hour ago, rjg854 said:

I'm with Eric, check that fuel pump. A leaking diaphragm is how gas gets into the crankcase.

Ok. I have found a rebuild kit for the metal fuel pumps

Edited October 8, 2023 by AHS
Mis spell

[ebinmaine 67,443]

Just now, AHS said:

Ok. I hate replacing fuel pumps, those cheap Chinese plastic ones!

You can likely rebuild the old metal one 

[Jon Paulsen 290]

A leaking needle valve in the carby can ruin the crankshaft's day 

 

Note: I have never had a Kohler engine, so as usual, take anything I say with a grain of salt, ya old salt 

 

Glad you gotcha a nice new toy. And, of course:

 

FLY NAVY! 

[Retired Wrencher 5,451]

11 hours ago, AHS said:

I had a 76 B80, mine was for plow duty. It boggles my mind how the K181’s would work!! AND even use such little gas!! I sold the 76 to a friend, he and the tractor only live about a mile from me. I got rid of my 76 in May ‘23 and i got a 77 B80 in October! 

Those are easy to find.These are the 60`s tractors 10  to 15 years ago. Easy to maintained.Enjoy the ride.

[moe1965 737]

Nice find and it's always fun for me to find a tractor that needs some TLC to get it running and find and fix all the little issues it may have.   It's what I like to do.  My issues is I never than wanted to sell them I get to attached 😄.  Have fun 

[WheelHorseNut 222]

On 10/7/2023 at 6:57 AM, AHS said:

Ya.. the seats gonna be the most expensive item!!

I got a decent replacement seat, for my B80, from Northern Tool.  It was $70 I think.

I love my B80 -- fun tractor.  I got mine for about $50, too.  It wasn't running and had a snow blower on it and came with a rotted out mower deck.  I changed the oil, new gas, new plug with proper gap and boom, she fired right up!

Nice and easy to work on.  Good luck with yours!