Crazy Horse Garage 47 #1 Posted September 28, 2023 I was wondering if anyone has used a 3D printer to duplicate any hard to find Wheel Horse parts? I have a 1961 701 with a busted up dash plate. 1 Share this post Link to post Share on other sites
ri702bill 8,326 #2 Posted September 28, 2023 Check with Lowell - he has the resin improved design - looks OE, but reinforced from behind. 2 Share this post Link to post Share on other sites
Achto 27,587 #3 Posted September 28, 2023 14 minutes ago, Crazy Horse 73 said: I was wondering if anyone has used a 3D printer to duplicate any hard to find Wheel Horse parts? I have a 1961 701 with a busted up dash plate. https://wheelhorsepartsandmore.com/product/3977-701-dash-plate-for-wheel-horse/ 1 Share this post Link to post Share on other sites
Handy Don 12,232 #4 Posted September 28, 2023 (edited) Or make a wooden one. Edited September 28, 2023 by Handy Don 4 3 Share this post Link to post Share on other sites
rmaynard 15,483 #5 Posted September 28, 2023 I received a 701 dash from Lowell back in May. It was a "second" with some defects which I was aware of. After retrofitting to work on my 701, I reported these findings to Lowell. 1. The mounting holes did not line up. 2. The plastic around the hole for the ignition switch was too thick. As I said, I mentioned and show him at the big show in June. I don't know if he made any changes since then. 3. Now, 5 months later, I have found that the plastic is yellowing faster than the ones that were made by Glen Pettit. Here is a picture of the dash from Glen that has been installed since 2012, next to Lowell's. Lowell's dash is stronger and doesn't warp if not mounted. 3 Share this post Link to post Share on other sites
Handy Don 12,232 #6 Posted September 28, 2023 18 minutes ago, rmaynard said: 3. Now, 5 months later, I have found that the plastic is yellowing faster than the ones that were made by Glen Pettit. I'd consider painting that the color you want. I’ve used Rustoleum 2x on plastic lawn furniture with very pleasing results. And according to @ebinmaine’s Paint Department, it comes in Navajo White! 1 1 Share this post Link to post Share on other sites
ebinmaine 67,529 #7 Posted September 28, 2023 2 minutes ago, Handy Don said: I'd consider painting that the color you want. I’ve used Rustoleum 2x on plastic lawn furniture with very pleasing results. And according to @ebinmaine’s Paint Department, it comes in Navajo White! Navajo. Cottage. Almond. There's another one that's escaping me at the moment. Different shades of off-white. Share this post Link to post Share on other sites
ri702bill 8,326 #8 Posted September 28, 2023 1 hour ago, ebinmaine said: There's another one that's escaping me at the moment. Shell White......... 1 Share this post Link to post Share on other sites
rmaynard 15,483 #9 Posted September 28, 2023 I had thought about painting, but the hassle of removing the cables, push button, key switch and ammeter has held me back. I probably will come winter. 1 Share this post Link to post Share on other sites
ebinmaine 67,529 #10 Posted October 4, 2023 On 9/28/2023 at 12:34 PM, ebinmaine said: Navajo. Cottage. Almond. There's another one that's escaping me at the moment. Different shades of off-white. On 9/28/2023 at 2:06 PM, ri702bill said: Shell White......... Canvas White too. Share this post Link to post Share on other sites
WHGuy413 2,689 #11 Posted October 4, 2023 My dad made one for @Crazywheelhorseman it came out pretty good. Not sure if he has installed it yet. 1 Share this post Link to post Share on other sites
