Fast build

[Jake the 312-8 72]

Wheel horse 1100 special 

[oliver2-44 9,742]

@Jake the 312-8 The movie link doesn't work for me?

[Jake the 312-8 72]

Yeah somthing is goin on i will post it in a little bit

 

[Jake the 312-8 72]

[Pullstart 62,840]

Do you have plans for a belt guard or a way to stop the belt while shifting?  Looks like fun, but don’t break your transmission 

[Tractorhead 9,064]

We are Waiting... 😎

 

Believe it was fun to ride it....

or maybe suicidal.... 😄

 

Video doesn‘t work also for me.

 

 

[wallfish 16,994]

Any change for the trans pulley too? Going smaller for it will speed it up even more.

 

You can substitute the belt support of the belt guard with some small steel rods attached to the engine to achieve the smooth clutching action.  

 

[Jake the 312-8 72]

Yeah i just have the belt guard off at the moment it does about 18 mph i will try to post a video 

[Jake the 312-8 72]

[Jake the 312-8 72]

It will not let me post a video 

[Jake the 312-8 72]

It has a 6 on the front and 4 on the back

[Handy Don 12,216]

With the axle inverted, I’m sure hoping that you have more than a “C”-clip securing those front wheel spindles into the axle.

Other members have drilled and tapped a hole in the end of the spindle for a bolt/washer (with blue Loctite) as a backstop to the C-clip!?

[wallfish 16,994]

ABSOLUTELY DO NOT TRUST THOSE C CLIPS FOR HOLDING THE SPINDLES IF THAT'S ALL YOU HAVE HOLDING THEM ON THERE!!!!!!!!!!!!!!

Can't stress that fact enough. It would save some pain to just go to the dentist's office and knock your teeth out there in the parking lot with a hammer so you can get treatment quicker.

[Jake the 312-8 72]

Yeah we drilled it and we have the biggest cotter pins you can have and there holding in there

[Jake the 312-8 72]

[Jake the 312-8 72]

[Jake the 312-8 72]

I wish i could post a longer video but it will only let me post a 3 sec video. Does anybody know what goin on 

[Tractorhead 9,064]

2 hours ago, Jake the 312-8 said:

I wish i could post a longer video but it will only let me post a 3 sec video. Does anybody know what goin on 

Post it on youtube and link it to here.

 

create an youtube account is free of charge, the Advertising Annoy‘s sometimes but so you be able to insert also huge Videos.

Curious about your Vid.

 

Did you checked by GPS how fast she is?

[Jake the 312-8 72]

https://youtu.be/sUkbSOrVtPE?si=11uCn5Kzh8sTuvm5

[Jake the 312-8 72]

There is one link i will make another vid a lot has been done since then i mean a LOT

[Jake the 312-8 72]

There is one link i will make another vid a lot has been done since then i mean a LOT

[Jake the 312-8 72]

And yeah it does about 19.5 mph