Identification

[JanGaLanG 53]

Bought this little guy the other day and was wondering if somebody could tell me what model it is. Trying to get it put back pretty original for my Grandpa. He will have a blast driving it through the towns parades.

[kpinnc 12,008]

Looks like a 60-61 Suburban (400, 500, or 401), but it's missing some things and the hood has been cut quite a bit. Fenders are mounted backwards as well.

[JanGaLanG 53]

2 hours ago, kpinnc said:

Looks like a 60-61 Suburban (400, 500, or 401), but it's missing some things and the hood has been cut quite a bit. Fenders are mounted backwards as well.

I was putting it back together earlier and the wife decided to drop a bombshell that were pregnant again. So I was rushing to get it put back together and get it in the garage so we could celebrate. 

Edited September 22, 2023 by JanGaLanG

[kpinnc 12,008]

1 hour ago, JanGaLanG said:

wife decided to drop a bombshell that were pregnant again.

 

Congratulations! 

[SylvanLakeWH 25,545]

 

 

[Achto 27,567]

   Congratulations! on your growing family.

 

Like state above you have a 60 or 61 Suburban. Looks like its had a bit of customizing. Here are a few pics of my 1961 401 Suburban for reference.

 

After I put the lift assembly back on.

 

With the customizing that has been done on your tractor, I might just roll with what you have.

Edited September 22, 2023 by Achto

[oliver2-44 9,739]

[Ed Kennell 38,153]

1 hour ago, Achto said:

With the customizing that has been done on your tractor, I might just roll with what you have.

                                                                                                                    Enjoy the tractor and good news.

to the          

[953 nut 55,197]

12 hours ago, JanGaLanG said:

Trying to get it put back pretty original for my Grandpa

Lucky Grandpa!                      Originality is inconsequential, having fun and making memories with your family is what is important.      

[rjg854 11,361]

     The others have you covered, all I'll add is make sure it's mechanically sound, and looks decent.  As long as runs well and is safe to drive, enjoy it as it is.

[peter lena 8,617]

@Achto   like the  RUSTIC , look of that , just enough ,not too much either way . thinking Sunday after noon drive , pete

[JanGaLanG 53]

8 hours ago, Achto said:

   Congratulations! on your growing family.

 

Like state above you have a 60 or 61 Suburban. Looks like its had a bit of customizing. Here are a few pics of my 1961 401 Suburban for reference.

 

After I put the lift assembly back on.

 

With the customizing that has been done on your tractor, I might just roll with what you have.

Thanks for the pictures so I have something complete to compare it to. Im not looking to restore it but just have it look pretty nice. I can see now thay I have some tiny wheels compared to what it should have. And I believe I could make some Foot jegs to look like those. Could you tell me what motor origionally came on these? Thanks again and I appreciate all the Congrats from you guys. 

[Achto 27,567]

30 minutes ago, JanGaLanG said:

Could you tell me what motor origionally came on these?

 

Kohler K91 in the 1960 400 & 1961 401. 

Tecumseh H55 in the 1960 500 

[WHX?? 48,815]

20 hours ago, JanGaLanG said:

 the wife decided to drop a bombshell that were pregnant again. 

Doctors found out today what causes that

Congrats! 

[JanGaLanG 53]

4 hours ago, Achto said:

 

Kohler K91 in the 1960 400 & 1961 401. 

Tecumseh H55 in the 1960 500 

Did some looking around online and my lord people are proud of those engines. I dont really want to put a predator on this thing so I may just put one of my flatheads on it. 

[Streetrodchev 798]

Welcome, and congrats on the growing family. 
 

This is my 1960 suburban 550.

 

[Achto 27,567]

1 hour ago, JanGaLanG said:

Did some looking around online and my lord people are proud of those engines. I dont really want to put a predator on this thing so I may just put one of my flatheads on it. 

 

Nothing wrong with a Predator. I also happen to have a 1960 Suburban 400 with a 6.5hp Predator in it. Did a little work to the engine & now it's pushing about 8.5hp at 3600RPMs. Fun little tractor, had to make a set of wheelie bars to keep it from flipping over backwards when you grab a hand full of throttle.

 

Edited September 23, 2023 by Achto

[JanGaLanG 53]

Thats cool buddy. Im into flatkart racing and clone style motors are all we run. Thats why Id like to throw one of my flatties on it to change it up alittle.

[oliver2-44 9,739]

Just an FYI. As you get familiar with that tractor be abused these are not synchronized transmissions. The transmission pulley needs to stop turning before you can shift. Wheel shouted used their belt guards to funnel slack belt around the engine drive pulley when you stepped on the clutch. The clutch really controls the idler pulley position. Your clone motor will need some belt guides to work with the transmission. 

[JanGaLanG 53]

18 hours ago, oliver2-44 said:

Just an FYI. As you get familiar with that tractor be abused these are not synchronized transmissions. The transmission pulley needs to stop turning before you can shift. Wheel shouted used their belt guards to funnel slack belt around the engine drive pulley when you stepped on the clutch. The clutch really controls the idler pulley position. Your clone motor will need some belt guides to work with the transmission. 

It came with an old briggs 206 that has the belt pulley on the shaft. It didnt come with the belt guard, I am going to have to make one of those.

[Achto 27,567]

I had to make a belt guard to work with the Predator engine on mine. Also added a belt brake on top of the tension pully to help stop the belt. Then the new guard went through a rusting process so that it would match the rest of the tractor.

 

[WHX?? 48,815]

Ahh I remember that Dan... wasn't for that and I got your original pulley we'd never met and got married... ... course we also wouldn't be so tractor heavy... 

Edited September 23, 2023 by WHX??

[JanGaLanG 53]

1 hour ago, Achto said:

I had to make a belt guard to work with the Predator engine on mine. Also added a belt brake on top of the tension pully to help stop the belt. Then the new guard went through a rusting process so that it would match the rest of the tractor.

 

Thank you for showing me how you made that. I will be making a copy of that. I have never in my life been on a forum with such stand up guys. Thank you all for making me feel welcome.

[Handy Don 12,214]

13 hours ago, JanGaLanG said:

I have never in my life been on a forum with such stand up guys. Thank you all for making me feel welcome.

Best thanks is to join in and pass it on.

[JanGaLanG 53]

Can someone explain to me the position of the lever and their coresponding gears. Im alittle confused. It seems that this is a T pattern if you will but I would like some explanation. Thanks!