Moparfanforever 844 #1 Posted September 19, 2023 First, the leaves start to change, so I get Bagger Horse out to take care of the fallen leaves. Then,there is a chance we will see the white stuff, snow ❄️!!! Don't hate!! So out comes Snow Horse , and it is Beastly !!! It will push ten inches of heavy wet snow without breaking a sweat. The rear tires are some old Duro six ply that I have had forever, and they are heavy without fluid, but these are fluid filled. Eighty lbs of lead in the tool box. Cub weights on the inside of the wheels, seventy lb weights of some kind on the outside, and my 225 sitting on it. Four foot blade and easily as it pushes snow ❄️, it could be wider. But not pushing my luck. SNOW,SNOW SNOW SNOW ❄️, don't shoot the messenger !!!!! Thanks !!!! 1 11 Share this post Link to post Share on other sites
Moparfanforever 844 #2 Posted September 19, 2023 And I really need to gather some parts to convert Snow Horse to hydraulic lift. The manual lift gets heavy and wears your arm out as you age. 7 Share this post Link to post Share on other sites
ebinmaine 67,454 #3 Posted September 19, 2023 49 minutes ago, Moparfanforever said: And I really need to gather some parts to convert Snow Horse to hydraulic lift. The manual lift gets heavy and wears your arm out as you age. Oh yeah it DO !! Good lookin' setup you have there. 3 Share this post Link to post Share on other sites
Moparfanforever 844 #4 Posted September 19, 2023 42 minutes ago, ebinmaine said: Oh yeah it DO !! Good lookin' setup you have there. Thank you !!! 2 Share this post Link to post Share on other sites
SylvanLakeWH 25,547 #5 Posted September 19, 2023 Nice rigs... 1 Share this post Link to post Share on other sites
Ed Kennell 38,158 #6 Posted September 20, 2023 5 hours ago, Moparfanforever said: And I really need to gather some parts to convert Snow Horse to hydraulic lift. The manual lift gets heavy and wears your arm out as you age. Hydro tranny and hydro lift....a must have on snow machines. Oh, and a foot pedal motion control and a heated cab. 2 1 Share this post Link to post Share on other sites
Moparfanforever 844 #7 Posted September 20, 2023 12 hours ago, Ed Kennell said: Hydro tranny and hydro lift....a must have on snow machines. Oh, and a foot pedal motion control and a heated cab. Heated cab would be sweet !! It only takes 30 minutes to put on all my winter clothes to blade snow,may have to live with that. 2 Share this post Link to post Share on other sites
midpack 862 #8 Posted September 20, 2023 1 hour ago, Moparfanforever said: Heated cab would be sweet !! If you have a cab, you don't need heat! I usually have the doors(at least one side) open 1 Share this post Link to post Share on other sites
Ed Kennell 38,158 #9 Posted September 20, 2023 1 hour ago, midpack said: If you have a cab, you don't need heat! These 80yo bones need heat. 1 2 Share this post Link to post Share on other sites
BairleaFarm 340 #10 Posted September 20, 2023 We dont get snow anymore but I still enjoy fall cleanup. I clean all the equipment up before it goes to the barn and get teh one tractor I keep out ready to go. Share this post Link to post Share on other sites
Bill D 1,920 #11 Posted September 20, 2023 Love the GT1848. 2 Share this post Link to post Share on other sites
Moparfanforever 844 #12 Posted September 20, 2023 5 hours ago, Ed Kennell said: These 80yo bones need heat. That kind of temp in the would be nice!! Share this post Link to post Share on other sites
Moparfanforever 844 #13 Posted September 20, 2023 4 hours ago, Bill D said: Love the GT1848. Thank you!! Share this post Link to post Share on other sites
WHGuy413 2,683 #14 Posted September 21, 2023 Just said to @WheelHorse_Kid that we needed to start thinking about what tractors will be out winter workers. Hate that that’s already on my mind. But thankful both boys enjoy plowing snow. 1 Share this post Link to post Share on other sites
Bill D 1,920 #15 Posted September 21, 2023 10 hours ago, Moparfanforever said: Thank you!! You're welcome. I noticed the flywheel side of the engine looks different than my GT 1800 and GT1642. Had the the engine been replaced at some point? Share this post Link to post Share on other sites
Retired Wrencher 5,451 #16 Posted September 21, 2023 Nice looking tractors. Always better to have more. Enjoy the ride. 1 1 Share this post Link to post Share on other sites
Moparfanforever 844 #17 Posted September 21, 2023 3 hours ago, Bill D said: You're welcome. I noticed the flywheel side of the engine looks different than my GT 1800 and GT1642. Had the the engine been replaced at some point? Yes it has been replaced. I think the valve seats were loose in the old Briggs so I bought a low hour Craftsman and swapped engines. There is something different on the "fan" that bolts to the flywheel to where grass/leaves doesn't stick to the blower screen as bad as the original WH setup. 1 Share this post Link to post Share on other sites
Bill D 1,920 #18 Posted September 21, 2023 1 hour ago, Moparfanforever said: Yes it has been replaced. I think the valve seats were loose in the old Briggs so I bought a low hour Craftsman and swapped engines. There is something different on the "fan" that bolts to the flywheel to where grass/leaves doesn't stick to the blower screen as bad as the original WH setup. Any idea what Craftsman mowers have those engines? I may be looking for one. Thanks. Share this post Link to post Share on other sites
Moparfanforever 844 #19 Posted September 21, 2023 Not sure on what year they are, but the front is squared off. The whole front end looks like a box. I will see if I can find a picture on the internet. Share this post Link to post Share on other sites
Moparfanforever 844 #20 Posted September 21, 2023 It looked like this ,but had five lug wheels and 16x6.50x8 fronts Share this post Link to post Share on other sites
Bill D 1,920 #21 Posted September 24, 2023 On 9/21/2023 at 11:03 AM, Moparfanforever said: It looked like this ,but had five lug wheels and 16x6.50x8 fronts Thanks. I'll keep my eyes open for one. Probably getting hard to find. 1 Share this post Link to post Share on other sites
