JayGrampy 1 #1 Posted August 22, 2023 I just replaced the belt that hooks all 3 pulls on the deck just 2 weeks ago and I cannot remember how it is routed. Cam someone get a picture of ithi? It is a 314-8, Help me please! Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,041 #2 Posted August 22, 2023 3-blade deck? 1 1 Share this post Link to post Share on other sites
Gasaholic 224 #3 Posted August 22, 2023 Pretty much on those decks, the easy way to do it - Start belt around center pulley and both sides pointing towards the idler side (left hand side from seat) , the front (from seat) length of belt going around the left hand spindle pulley, the rear flat face going to around idler, then thread belt to the RH spindle and start it in the front side of the groove, rotate all 3 spindles half turn and belt should pop right on in alignment and tensioned. 2 1 Share this post Link to post Share on other sites
JayGrampy 1 #4 Posted August 22, 2023 Thank you for the answers!! I had to sit and study it for a little bit, but I figured it out. I'm new to wheel Horse maintenance, so I will be asking more. Share this post Link to post Share on other sites
Ed Kennell 38,158 #5 Posted August 22, 2023 1 hour ago, JayGrampy said: I had to sit and study it for a little bit, but I figured it out. I put that belt on dozens of times and I still have to sit and study to get it right. to the 3 Share this post Link to post Share on other sites
Lane Ranger 10,968 #6 Posted August 23, 2023 1 hour ago, Ed Kennell said: I put that belt on dozens of times and I still have to sit and study to get it right. to the yes they put that belt routing decal on for a reason! I have done it wrong several times and referred back to the belt routing decal! 1 Share this post Link to post Share on other sites
JayGrampy 1 #7 Posted August 23, 2023 I wish this one had a decal. I should have taken a picture. 1 Share this post Link to post Share on other sites
lynnmor 7,305 #8 Posted August 23, 2023 7 hours ago, JayGrampy said: I wish this one had a decal. I should have taken a picture. Don't wish, get you decals here. 1 1 Share this post Link to post Share on other sites
ruskimaster 0 #9 Posted August 29, 2023 (edited) I also have a 314-8, I'm replacing the same exact belt. I got the orientation correct, but for some reason the #93-9808 belt part number is not fitting... I'm like 5inches from being able to put it around the 3rd pulley. Is 82inch the correct size or should it be bigger? Here is a link to a similar belt I purchased: https://www.vbeltguys.com/products/93-9808-toro-wheel-horse-replacement-belt#trustspot-widget-wrapper I'm a total newbie at this, first big fix I've done on the tractor after acquiring it 2yrs ago. Any help would be so awesome! Edit: May have answered my own question, I looked at the mower deck details rather than the actual tractor and found dimensions that made more sense with part# 102741, I have a 36" mowing deck. 96 1/4" is what the length was for this part. I'm going to give it a try tomorrow unless anyone else has any other suggestions. Thanks, -RM Edited August 29, 2023 by ruskimaster Answered my own questions, want others to have an opportunity to see it Share this post Link to post Share on other sites
JayGrampy 1 #10 Posted August 29, 2023 (edited) The belt I got was 84x1/2 .But it is a bigger deck. 46 or 48, I think. Edited August 29, 2023 by JayGrampy Added other belt measurements. Share this post Link to post Share on other sites
