mrtortoise 3 #1 Posted August 13, 2023 Hello, I've got a Toro Raider 10 1-0360 1973. It needs a new cotter pin for the clutch linkage. Does anyone know the dimensions of this part please? Many thanks, Paul. Share this post Link to post Share on other sites
peter lena 8,716 #2 Posted August 13, 2023 @mrtortoise , seriously ? have a local hard ware store near by ? go to the small part bins and match it up , while you are there pick up some flat washers for your linkage ends to firm that movement spot up , also add sone aerosol lubrication to all related , impvement areas .make the rust rust run out rust and sloppy fit is a common problem , when enhanced . it works much easier , pete 2 1 Share this post Link to post Share on other sites
pfrederi 17,856 #3 Posted August 13, 2023 If you mean part 51 in this picture it is 1/8" x 1" Share this post Link to post Share on other sites
ri702bill 8,480 #4 Posted August 13, 2023 I usually but a "Party Pack" of assorted sizes - they all eventually get used.... 3 Share this post Link to post Share on other sites
SylvanLakeWH 25,894 #5 Posted August 13, 2023 If it fits, use it. 1 Share this post Link to post Share on other sites
