gilstr 16 #1 Posted August 12, 2023 (edited) Here is my C175 twin Predator. Had this engine for about a year and was looking for something easy to put it in. And this thing was way easier than doing the Sears that i started doing. Only hard part was machining back of pulley so it would slide on crank and line up with the belt. I just stuck it on the engine backwards with it running and hit it with a flap disc lol. Worked. Bought the exhaust pipes off ebay and flipped the muffler around, it was not fun testing with it shooting towards you let me tell ya. Bought this tractor for 20 bucks have 400 in it cause someone stole the engine from previous owner and I had to buy pulley and pto and few other things off ebay. Did bearings in the deck to and have new blades in the way. All that's left is a new cam adjuster for hydro and should be good to go. Will probably take back apart and paint this winter. Edited August 12, 2023 by gilstr 10 2 Share this post Link to post Share on other sites
