oliver2-44 9,756 #26 Posted August 7, 2023 The square pan seat and oil bath air cleaner are worth it. So #2 and possible #3 within a week. I’m going to have to keep an eye out that you stay on your end of the state. Not that I haven’t put on a few miles rustling tractors. 1 2 Share this post Link to post Share on other sites
Thatoneguy 197 #27 Posted August 7, 2023 He wants 100$. I think I will buy it. Gunna pick it up the 18th! Y’all can just stay over on that side! I will tell you after the fact if I have to go your way to scoop one out from under you! 1 Share this post Link to post Share on other sites
ebinmaine 67,534 #28 Posted August 7, 2023 Belt guard looks like it might read 552 (?) which would make it a 62. Agreed with above on the parts cost. 1 Share this post Link to post Share on other sites
Pullstart 62,902 #29 Posted August 7, 2023 9 hours ago, Pullstart said: The wrong engine, but it looks to be a ‘64 model. I’d say it’s worth it! 2 hours ago, ebinmaine said: Belt guard looks like it might read 552 (?) which would make it a 62. Agreed with above on the parts cost. I stand corrected, and it’s a ‘62 front axle. I think more pictures were added, or I jumped the gun! I’d agree with EB. 2 Share this post Link to post Share on other sites
Thatoneguy 197 #30 Posted August 7, 2023 I added 2 right after you commented. Realized I only put one on the original post 2 Share this post Link to post Share on other sites
WHX?? 48,821 #31 Posted August 7, 2023 552 with a Wisconsin repo. Definitely over 100 in parts on her. 1 1 Share this post Link to post Share on other sites
Thatoneguy 197 #32 Posted August 7, 2023 (edited) 3 minutes ago, WHX?? said: 552 with a Wisconsin repo. Definitely over 100 in parts on her. I will be picking it up soon! What is a Wisconsin repo? Edited August 7, 2023 by Thatoneguy Share this post Link to post Share on other sites
Handy Don 12,232 #33 Posted August 7, 2023 (edited) 7 minutes ago, Thatoneguy said: What is a Wisconsin repo? Repower, i.e. an engine swap using a Wisconsin engine. Edited August 7, 2023 by Handy Don 1 1 Share this post Link to post Share on other sites
Thatoneguy 197 #34 Posted August 7, 2023 Just now, Handy Don said: Repower, i.e. an engine swap using a Wisconsin engine. What came on it originally? Share this post Link to post Share on other sites
WHX?? 48,821 #35 Posted August 7, 2023 Techy... Squonky speak for Tecumseh 2 Share this post Link to post Share on other sites
WHX?? 48,821 #36 Posted August 7, 2023 (edited) What that 73 no name should look like. I this one for a franky. Had a rebuilt motor that was never fired! Only a three speed but not a deal breaker Edited August 7, 2023 by WHX?? 4 Share this post Link to post Share on other sites
Thatoneguy 197 #37 Posted August 7, 2023 30 minutes ago, WHX?? said: Techy... Squonky speak for Tecumseh I myself am a Techy fan! I am sure the haters will have something to say about this! 3 Share this post Link to post Share on other sites
Handy Don 12,232 #38 Posted August 7, 2023 (edited) On 8/7/2023 at 9:29 AM, Thatoneguy said: What came on it originally? On 8/7/2023 at 9:33 AM, WHX?? said: Techy... Squonky speak for Tecumseh In ’61-6?, it would have been a 5 or 6 hp Tecumseh with recoil or electric start, depending on the model. Edited August 8, 2023 by Handy Don 1 Share this post Link to post Share on other sites
Thatoneguy 197 #39 Posted August 7, 2023 24 minutes ago, WHX?? said: What that 73 no name should look like. I this one for a franky. Had a rebuilt motor that was never fired! Only a three speed but not a deal breaker That looks good! I don’t plan on restoring this one I got, I just want to get it running solid and it will be my work tractor. The 120 I am restoring will be my show off one! 3 1 Share this post Link to post Share on other sites
Handy Don 12,232 #40 Posted August 7, 2023 Just now, Thatoneguy said: I myself am a Techy fan! I am sure the haters will have something to say about this! We don’t have haters here. We fans and non-fans. 4 1 Share this post Link to post Share on other sites
ebinmaine 67,534 #41 Posted August 7, 2023 2 hours ago, Thatoneguy said: That looks good! I don’t plan on restoring this one I got, I just want to get it running solid and it will be my work tractor. The 120 I am restoring will be my show off one! Ain't nuttin' wrong with a restored beast being a great worker too. Both my "workers" are fully restored from the frame up. 1 Share this post Link to post Share on other sites
Pullstart 62,902 #42 Posted August 8, 2023 On 8/7/2023 at 10:05 AM, Thatoneguy said: I myself am a Techy fan! I am sure the haters will have something to say about this! I love a good running Tecky, until it ain’t! 1 3 Share this post Link to post Share on other sites
WHX?? 48,821 #43 Posted August 8, 2023 On 8/7/2023 at 9:07 AM, Thatoneguy said: get it running solid and it will be my work tractor. Same Here ... @Pullstart got the ten inch rims & gave me some 12s. Got some ags & tri ribs to throw on it and gonna be a house plow mule. Puling a little 8 mold board so be a eight on eight ... 2 Share this post Link to post Share on other sites
Pullstart 62,902 #44 Posted August 8, 2023 20 minutes ago, WHX?? said: Same Here ... @Pullstart got the ten inch rims & gave me some 12s. Got some ags & tri ribs to throw on it and gonna be a house plow mule. Puling a little 8 mold board so be a eight on eight ... Uncle Jim rags on me all day about keepin’ them pure, then goes and does something like this… 1) Robs his ole’ Mable or whatever her name is of her 10’s in favor of 12’s… 2) Names a “No Name”. 3) Feeds my fuel to build another custom with @Lil’ Pullstart! 1 2 Share this post Link to post Share on other sites
Thatoneguy 197 #45 Posted August 8, 2023 1 hour ago, Pullstart said: I love a good running Tecky, until it ain’t! I love a good running anything until it ain't! 1 1 Share this post Link to post Share on other sites
