300/400 tail lights

[RED-Z06 2,221]

The lights on my 416 are going bad, the contacts are going and im looking into replacement options that look the same but more importantly fit the same.  

[peter lena 8,629]

 @RED-Z06   walmart has them , same size , led , nice and bright , have them on my 3 horses , zero issues  about $ 6-7  each , also available in orange . pete                                                                                                                                               

[RED-Z06 2,221]

4 hours ago, peter lena said:

 @RED-Z06   walmart has them , same size , led , nice and bright , have them on my 3 horses , zero issues  about $ 6-7  each , also available in orange . pete                                                                                                                                               

Went and looked at them, i liked them but I want to run my own bulbs, i dont like hardwired leds.  Found these on ebay for about 12ea.

[peter lena 8,629]

@RED-Z06 that will work , never had an issue with the glowing  LED lights , might get a better price on amazon  .easy swap ,pete  

[RED-Z06 2,221]

2 hours ago, peter lena said:

@RED-Z06 that will work , never had an issue with the glowing  LED lights , might get a better price on amazon  .easy swap ,pete  

They usually work well but if one diode fails you cant fix it, then you have to find another matching replacement.  I mainly ran into it with my trailer lights, they had them built in and it was fine intil half the brake light ring on one side failed and i couldnt find another single light so i had to get a while kit 

[bds1984 1,429]

Any place that sells trailer lighting will have what you need.  I drive I94 daily and pass by many gas stations that sell them.

[RED-Z06 2,221]

Got them on.  Used the factory holes, put in led bulbs, they frame ground like oem, connected 1 wire each and off it went..both sides took about 5mins to mount including drilling the stock rivets.

Edited July 7, 2023 by RED-Z06

[peter lena 8,629]

@RED-Z06  like the led,s do a lot of roadside plowing and like the road view , never had an issue , that horse paint , could use an areosol lubricant spray down , let it sit / soak a day , rub it down till dry  with a soft clean cloth , do it again , second rubdown will probably bring out the dull paint . I  use a 6"  palm buffer with any cleaner wax , makes it quick easy , having done my horses , the paint just is very solid red , rub them down with a lubricated cloth. regularly , started with a dull finish . they all look clean , all workers , pete

[peter lena 8,629]

@RED-Z06  ,  faded to clean / shinny , pete

 

[RED-Z06 2,221]

41 minutes ago, peter lena said:

@RED-Z06  like the led,s do a lot of roadside plowing and like the road view , never had an issue , that horse paint , could use an areosol lubricant spray down , let it sit / soak a day , rub it down till dry  with a soft clean cloth , do it again , second rubdown will probably bring out the dull paint . I  use a 6"  palm buffer with any cleaner wax , makes it quick easy , having done my horses , the paint just is very solid red , rub them down with a lubricated cloth. regularly , started with a dull finish . they all look clean , all workers , pete

Its been clearcoated. .it bought time but its bad now,  whole tractor needs a strip, respray and decals.