953 nut 55,228 #126 Posted December 13, 2023 Jay @JPWH, has this been pushed back in the corner or are you holding out on us? 3 1 Share this post Link to post Share on other sites
JPWH 6,033 #127 Posted December 13, 2023 Dick @953 nut I'm not holding out I have just been too busy to get back on this project. I have been visiting my favorite sheet metal shop and getting drops for the project. 2 2 Share this post Link to post Share on other sites
Lee1977 6,659 #128 Posted December 13, 2023 4 hours ago, JPWH said: Dick @953 nut I'm not holding out I have just been too busy to get back on this project. I have been visiting my favorite sheet metal shop and getting drops for the project. Are you joining the slow race with EB and Pullstart, they are way ahead of you by 3 or 4 years. 1 6 Share this post Link to post Share on other sites
JPWH 6,033 #129 Posted December 31, 2023 Got the dump truck shoes in. 5 5 Share this post Link to post Share on other sites
19richie66 17,508 #130 Posted December 31, 2023 Must have been on Santa’s good list 3 2 Share this post Link to post Share on other sites
JPWH 6,033 #131 Posted January 5 Some of the metal I have so far. 3 3 Share this post Link to post Share on other sites
sjoemie himself 3,068 #132 Posted January 8 Just stumbled across this topic. Interesting project and I'll be following along 3 Share this post Link to post Share on other sites
JPWH 6,033 #133 Posted January 18 This project just got derailed for the time being. I will get it back on track I just don't know when. I have been diagnosed with rectal cancer. The treatment will start next week and progress will be determined by how I respond to the treatment. I will lose the month of May recovering from the planned surgery around May first. 14 Share this post Link to post Share on other sites
elcamino/wheelhorse 9,297 #134 Posted January 18 Sorry to hear about your health problems. Please keep us updated. 3 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #135 Posted January 19 Prayers for a successful treatment and recovery. 4 Share this post Link to post Share on other sites
953 nut 55,228 #136 Posted January 19 Dear Lord, your servant Jay Paxton is in need of Your healing hand. He will undergo cancer treatment and we humbly ask You be with him and his family. Turn this weakness into strength, suffering into compassion, sorrow into joy, and pain into comfort for others. Let them be filled with patience and joy in Your presence as they wait for Your healing touch. Guide the hands of the medical staff that will help him and guard against any infection. Please restore Your servant to full health, Lord. We ask this in the name of Your Son, Jesus Christ 12 Share this post Link to post Share on other sites
Ed Kennell 38,174 #137 Posted January 19 1 hour ago, JPWH said: I will get it back on track With this positive attitude, you've won the first battle Jay. Keep fighting my friend. We're all with you. 4 3 Share this post Link to post Share on other sites
Handy Don 12,226 #138 Posted January 19 2 hours ago, JPWH said: This project just got derailed for the time being. You've now been added to my prayers. I ask for strength and wisdom for you, your family, and the health providers who’ll treat you and for the best possible outcome. As Ed said, we are all with you.. 6 Share this post Link to post Share on other sites
dclarke 4,032 #139 Posted January 19 Prayers being sent, Jay! 🙏🙏 1 2 Share this post Link to post Share on other sites
rjg854 11,361 #140 Posted January 19 14 hours ago, 953 nut said: Dear Lord, your servant Jay Paxton is in need of Your healing hand. He will undergo cancer treatment and we humbly ask You be with him and his family. Turn this weakness into strength, suffering into compassion, sorrow into joy, and pain into comfort for others. Let them be filled with patience and joy in Your presence as they wait for Your healing touch. Guide the hands of the medical staff that will help him and guard against any infection. Please restore Your servant to full health, Lord. We ask this in the name of Your Son, Jesus Christ 1 2 Share this post Link to post Share on other sites
JPWH 6,033 #141 Posted January 19 Thank You all for all the prayers. I go the the oncologist next Tuesday then I will have the whole story. I will start a new thread with all the information I have been told and keep you posted. 5 4 Share this post Link to post Share on other sites
JCM 9,165 #142 Posted January 19 Very sorry to hear this Jay. In 2014 I myself went through colon cancer. Unfortunately I had the wrong surgeon perform the operation and in 2021 I went back in to be opened up and corrected. Long road but here I am still, somebody loves me. Keep your chin up and a positive attitude and you will be back finishing up your build. If you feel the need to talk PLEASE do not hesitate to send me a PM if you need anything. @JPWH Take care. Jim 1 5 Share this post Link to post Share on other sites
JPWH 6,033 #143 Posted January 19 @JCM Jim, thank you for the encouragement. Fortunately I have one of the 2 best in this area. Or so I'm told. Thanks for the offer to talk. I may have questions. Jay 1 2 Share this post Link to post Share on other sites
ebinmaine 67,496 #144 Posted January 19 4 minutes ago, JPWH said: @JCM Jim, thank you for the encouragement. Fortunately I have one of the 2 best in this area. Or so I'm told. Thanks for the offer to talk. I may have questions. Jay Ole Jim up here @JCM Plunge will be a good one to shoot the breeze at. He's good people. 3 1 Share this post Link to post Share on other sites
JPWH 6,033 #145 Posted June 27 Time to get this project back on track. Although I'm a few weeks away from being able to do any fabricating I can work on design and parts sourcing. I had been struggling with the dash and seating design. I discovered I was trying to use the wrong hood. I had originally planned on a round hood front end but have decided to use a 953 front end and dash. I have sourced the grill and dash now I need to visit my favorite sheet metal shop for the rest. I am looking forward to getting back to fabricating. 10 Share this post Link to post Share on other sites
19richie66 17,508 #146 Posted June 27 Will be eagerly awaiting Fabricating is good therapy. 5 1 Share this post Link to post Share on other sites
ebinmaine 67,496 #147 Posted June 27 37 minutes ago, 19richie66 said: Will be eagerly awaiting 37 minutes ago, 19richie66 said: TRACTOR ANYTHING is good therapy. 2 2 Share this post Link to post Share on other sites
Handy Don 12,226 #148 Posted June 27 4 hours ago, JPWH said: Time to get this project back on track. Hooray! 2 Share this post Link to post Share on other sites
JPWH 6,033 #149 Posted June 27 My oncologist said I could go back to working in my shop 2 weeks after my last chemo therapy. That means I can go back to fabrication in 4 weeks. 3 2 4 Share this post Link to post Share on other sites
oliver2-44 9,750 #150 Posted June 27 9 hours ago, JPWH said: decided to use a 953 front end and dash. I have sourced the grill and dash Love the 953 idea! 2 Share this post Link to post Share on other sites
