gwgdog66 23 #1 Posted August 9, 2009 This engine is on an old Miller welder/generator. The magnets came loose from the inside of the flywheel, and were stuck to the alternator. That explains why it quit charging the battery. What type glue is recommended to use to stick these back onto the flywheel? Share this post Link to post Share on other sites
Jim_M 178 #2 Posted August 9, 2009 I glued some magnets to the inside of a starter case with JB weld and it's still hanging in there. Share this post Link to post Share on other sites
gwgdog66 23 #3 Posted September 25, 2009 I used Gorilla glue. It set quickly and they are stuck good. I've run it quite a bit and it is now charging the battery. Share this post Link to post Share on other sites
