Snowblower fitment

[Jar 2]

I have a snowblower for a c-175 and I would like to know if it will fit on my sons c-120. 

The c-175 is a 1983 and the c-120 is a 1976. Thanks for your input. 

[rjg854 11,354]

It should. I would imagine.

[Jar 2]

Thanks. I thought that it would too

 

[Pullstart 62,814]

The 175 is. Black hood and the 120 is not, right?  It might just stick out further but should work fine.  

[Pullstart 62,814]

I gotta ask… you expecting snow soon?

[8ntruck 6,993]

 It was almost 90 degrees here in Michigan today.  I was wondering about the timing of that question, too.

[AHS 1,440]

7 hours ago, Pullstart said:

I gotta ask… you expecting snow soon?

Never too early!! Although..ive been putting off my C175 snowblower duties. Which is. Change the fuel line, replace a starter and wire the tractor right!

[Racinbob 11,047]

12 hours ago, Jar said:

I have a snowblower for a c-175 and I would like to know if it will fit on my sons c-120. 

The c-175 is a 1983 and the c-120 is a 1976. Thanks for your input. 

 

Perfect fit. No mods needed. Any of the attachments are 100% interchangeable. I'm running a mid 70's 48" mower deck on a 2005 and put the 42" from 2005 on the 76. 

[8ntruck 6,993]

  mostly.  I've put a 1973 42" deck on a 1982 C-195.  Had to make the slot in the mower's lift link to get it to work on the Super C.  Got to space the gage wheels out to clear the rear tires when the deck is lifted, too.  

 

Then again, Wheel Horse never listed a 42" deck for that tractor.  48" was the smallest.  

 

My point is, even though the 42" deck was not recommended for the C-195, the hitch points and belt routing were interchangeable.  The modifications I did were really minor.