SylvanLakeWH 25,524 #26 Posted August 20, 2023 It's definitely separated on the right side... I agree it's odd as it should have blown at the narrow part... greatly appreciate both your input... i'm looking at the breaker right now... Share this post Link to post Share on other sites
953 nut 55,156 #27 Posted August 20, 2023 12 hours ago, wallfish said: Could it have been heating up at that connection because of corrosion causing an arc fault? Maybe clean those connections up? 2 1 Share this post Link to post Share on other sites
wallfish 16,994 #28 Posted August 20, 2023 Saw this while searching for something else. Maybe these type of fuses will fit your mount ??? https://www.amazon.com/dp/B0BLSC5CS9/ref=sspa_dk_detail_6?psc=1&pd_rd_i=B0BLSC5CS9&pd_rd_w=G0SGD&content-id=amzn1.sym.eb7c1ac5-7c51-4df5-ba34-ca810f1f119a&pf_rd_p=eb7c1ac5-7c51-4df5-ba34-ca810f1f119a&pf_rd_r=HRSGBQMRTW9G5V7WV6NG&pd_rd_wg=P1YGA&pd_rd_r=aea2b63a-c2f8-4b46-9fa5-ef2804dd9f79&s=industrial&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw 1 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,524 #29 Posted August 22, 2023 She floats!!! Thanks @Achto for the perfect solution!!! And thanks to @wallfish and @953 nut for connection suggestions/observations... cleaned up and treated with @peter lena's second favorite - dielectric grease... Needed a bit of trimming to fit on the plastic cover, but come to find out some one else has trimmed a bit before me... But there were no cheese curd crumbs or Capt'n spills in the area so @WHX?? and achto are off the hook...! All in all a good fix... 8 1 Share this post Link to post Share on other sites
WHX?? 48,813 #30 Posted August 23, 2023 I was going to suggest snow plow fuses that 'Fish posted but like Dan's suggestion better. It trips go looking for further issues and reset it. Fuses usually don't blow for no reason. 2 1 Share this post Link to post Share on other sites
Evguy 556 #31 Posted August 23, 2023 On 8/19/2023 at 9:01 PM, SylvanLakeWH said: It's definitely separated on the right side... I agree it's odd as it should have blown at the narrow part... greatly appreciate both your input... i'm looking at the breaker right now... Glad you sorted it out, I missed all the fun, 😆. There are many ways to go on replacements, I like the breaker idea. 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,524 #32 Posted September 1 (edited) Update: Unfortunately, need to move this on... downsizing due to space and lower back issues... Check out the classified section... Edited September 1 by SylvanLakeWH 1 Share this post Link to post Share on other sites
