Tinman1962 14 #1 Posted May 4, 2023 My 864 needs a new regulator which is the proper replacement part Share this post Link to post Share on other sites
Achto 27,502 #2 Posted May 4, 2023 (edited) 1 hour ago, Tinman1962 said: My 864 needs a new regulator which is the proper replacement part I use part #AHGDR6004 from this site. http://www.psep.biz/store/kohler_starter_motors.htm I have had good luck with them. Edited May 4, 2023 by Achto 1 1 Share this post Link to post Share on other sites
squonk 41,020 #3 Posted May 4, 2023 https://www.dbelectrical.com/products/new-generator-regulator-14-2-volt-15-18-amp-output.html 2 Share this post Link to post Share on other sites
Handy Don 12,141 #4 Posted May 4, 2023 1 hour ago, squonk said: https://www.dbelectrical.com/products/new-generator-regulator-14-2-volt-15-18-amp-output.html Currently unavailable 🙃 1 Share this post Link to post Share on other sites
squonk 41,020 #5 Posted May 4, 2023 1 hour ago, Handy Don said: Currently unavailable 🙃 Glad I have a couple spares ! 1 Share this post Link to post Share on other sites
ri702bill 8,283 #6 Posted May 4, 2023 Don't forget there is a Terminal under it - a total of 4 Terminals..... 1 1 Share this post Link to post Share on other sites
pfrederi 17,663 #7 Posted May 5, 2023 13 hours ago, ri702bill said: Don't forget there is a Terminal under it - a total of 4 Terminals..... That picture is of a 3 wire regulator there is not bottom terminal. 4 terminal regulators have Load (L), Bat, Field (F). on the top Armature (A) on the bottom. There is no Load on a 3 terminal unit. and the one marked Gen goes to the A terminal on the genny itself 2 1 Share this post Link to post Share on other sites
