Bill D 1,920 #1 Posted April 24, 2023 Any one got any ideas on how to stop Eaton burps? I've got three Eaton's and they all burp. Making a mess on the shed floor. Share this post Link to post Share on other sites
JCM 9,136 #2 Posted April 24, 2023 I feel your pain. First time in over 20 years this has happened to 2 of 3 Eaton 1100 Hydros this past Winter ? Share this post Link to post Share on other sites
oliver2-44 9,743 #3 Posted April 24, 2023 Rolaids 3 Share this post Link to post Share on other sites
cleat 5,934 #4 Posted April 24, 2023 The dipstick handle is the vent. Make sure it is not plugged. Clearing the dipstick vents stopped all my oil burp issues. 1 1 Share this post Link to post Share on other sites
Ed Kennell 38,159 #5 Posted April 24, 2023 None of my three 1100s burp. The one is sorta like me ....it needs a 5 minute warm-up before it can move. 1 Share this post Link to post Share on other sites
rmaynard 15,436 #6 Posted April 24, 2023 My 416-H with Eaton 1100 has never burped. However, unlike @Ed Kennell mine moves immediately in all kinds of weather, unlike me. 2 2 Share this post Link to post Share on other sites
Handy Don 12,216 #7 Posted April 24, 2023 (edited) 17 hours ago, cleat said: The dipstick handle is the vent. Make sure it is not plugged. Clearing the dipstick vents stopped all my oil burp issues. On one of the Eatons I acquired, a PO had crushed the dipstick handle closed (I could see the tool marks) and I had to carefully pry it open again. Edited April 24, 2023 by Handy Don 1 Share this post Link to post Share on other sites
