Docwheelhorse 2,660 #1 Posted April 16, 2023 Happy Sunday Morning, @grnlark(Matt Castagno) turned me onto this GT1142 as I'm a Briggs guy... Went and bought it for the nice 48" deck... tractor is all but parts now... But look at how this thing has been treated---makes me shake my head. 1) this is one of the very early no factory rubber hood strap tractors. So... somebody went and bought the retrofit kit and burned the instructions before looking at them. Check this mess out. 2) I think it needs a longer bolt holding throttle... 3) poor tractor suffered from fat guy syndrome and somebody tore whole dash tower out pulling themselves up with steering wheel. 4) chains will "self clearance themselves and move anything out of way if needed" (gas tank mount) On and on... But miraculously the deck and mule drive us very nice Tony 3 Share this post Link to post Share on other sites
Lee1977 6,663 #2 Posted April 16, 2023 You can fix it, just going to take a little longer. It's a good thing he didn't have any cut off tools, it might be in more pieces. 1 3 Share this post Link to post Share on other sites
ri702bill 8,327 #3 Posted April 16, 2023 Throttle bolt, Tony?? Maybe he was planning on adding grounds and stacking up 32 or so ring connectors.... That guy was a hack.... Bill 2 1 Share this post Link to post Share on other sites
ri702bill 8,327 #4 Posted April 16, 2023 48 minutes ago, Docwheelhorse said: poor tractor suffered from fat guy syndrome and somebody tore whole dash tower out pulling themselves up with steering wheel. Is the plastic on the wheel hub cracked out at the overmold?? That usually goes hand and hand with the dash issue. 1 Share this post Link to post Share on other sites
c-series don 8,711 #5 Posted April 16, 2023 I’ve never seen a Work Horse that didn’t have hood latches from the factory. What was supposed to hold it down then? 1 Share this post Link to post Share on other sites
wallfish 17,004 #6 Posted April 16, 2023 The scary part about the whole thing is that Briggs! Let me know if you're taking off those hood straps. Need some for the new custom hood. The ones I bought are way too big 1 Share this post Link to post Share on other sites
Horse Newbie 7,071 #7 Posted April 16, 2023 That crack at the corners on the dash tower may not totally be from pulling on the steering wheel… My 1984 Work Horse GT-1600 had a bit of that, though not nearly as bad. I chalked it up to a little metal fatigue or stress. A little mig welding and grinding fixed that… 1 Share this post Link to post Share on other sites
Docwheelhorse 2,660 #8 Posted April 16, 2023 (edited) On 4/16/2023 at 11:07 AM, c-series don said: I’ve never seen a Work Horse that didn’t have hood latches from the factory. What was supposed to hold it down then? They had this funky latch like a car door and it sucked and was quickly changed to straps by WH Edited April 18, 2023 by Docwheelhorse 2 Share this post Link to post Share on other sites
Docwheelhorse 2,660 #9 Posted April 16, 2023 1 hour ago, wallfish said: The scary part about the whole thing is that Briggs! Let me know if you're taking off those hood straps. Need some for the new custom hood. The ones I bought are way too big Your gonna pick on a Briggs then ask for parts? Sure!!! $5000 for pair!! Lol 4 Share this post Link to post Share on other sites
ri702bill 8,327 #10 Posted April 16, 2023 1 hour ago, Docwheelhorse said: Sure!!! $5000 for pair!! Lol With free shipping??????? 3 Share this post Link to post Share on other sites
RandyLittrell 3,884 #11 Posted April 18, 2023 This fat guy can swing my leg over the top of the seat and sit right down, maybe it's idiot problem! Randy 2 Share this post Link to post Share on other sites
Retired Wrencher 5,459 #12 Posted April 18, 2023 Tony What is the plane for this tractor? Or you yankin the engine for another project? 1 Share this post Link to post Share on other sites
Docwheelhorse 2,660 #13 Posted April 18, 2023 (edited) 2 hours ago, Retired Wrencher said: Tony What is the plane for this tractor? Or you yankin the engine for another project? Hi, why do you ask? Supposedly it runs... battery is junk... my plans where to take the seat and put it on a 416-8 (Onan) thats going to a friend in Columbia. The snow plow bracket is coming off and going in my stash and then it was going to get parked for parts... it has a relatively new starter and fuel pump and I have a couple other Briggs tractors that I may combine into one good machine. But like everyone else I'm always full of good intentions but 2 years goes by before I even look at it. Are you looking for a project? Message me on FB or Text and maybe I can find you something in my pile of waiting projects Tony Edited April 18, 2023 by Docwheelhorse 2 Share this post Link to post Share on other sites
Docwheelhorse 2,660 #14 Posted April 18, 2023 9 hours ago, RandyLittrell said: This fat guy can swing my leg over the top of the seat and sit right down, maybe it's idiot problem! Randy I also find as a "fat guy" that I don't need to try and tear the steering out to get on... 1 Share this post Link to post Share on other sites
