Dan.gerous 2,696 #1 Posted April 11, 2023 Finally picked up this C-something. It's been rotting away for years in a guys lockup just down the road. Managed to buy it off him along with a selection of rusty implements. Still have a plow (plough?) To pick up and a few other bits and pieces. Haven't had a chance to have a good look yet, but the wheelhorse itself is in poor shape. Not sure what the engine is, will have a cup of tea and investigate further... 4 5 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,041 #2 Posted April 11, 2023 Not often we see attachments made in Belgium. Please post the model and serial numbers so we can add to the lists. The dozer blades at the time came in two packages. The 6-4112 could be used with a 42" blade and a 54" wide blade for the higher hp model tractors. 6 1 Share this post Link to post Share on other sites
Dan.gerous 2,696 #3 Posted April 11, 2023 1 hour ago, gwest_ca said: Not often we see attachments made in Belgium. Please post the model and serial numbers so we can add to the lists. The dozer blades at the time came in two packages. The 6-4112 could be used with a 42" blade and a 54" wide blade for the higher hp model tractors. So it's a 14hp, not sure if that's the original engine or not. Belgium made machine as well. 2 Share this post Link to post Share on other sites
Dan.gerous 2,696 #4 Posted April 11, 2023 When I got it the wheels wouldn't turn, but by the time I got it off the trailer it was free wheeling fine. Gearbox felt locked up but it freed as soon as I put it in 3rd and nudged the machine ahead a couple of times. Engine turns over fine, no spark but I'm not sure where the coil etc are on these ones as it's different to my 301's. Also not sure if it has electric start or not. Looks likely to be a parts machine as the tower is quite badly rusted. The rear fender is rusted away completely. Bottom of the hood is also rusted. Share this post Link to post Share on other sites
Dan.gerous 2,696 #5 Posted April 11, 2023 Forgot pictures of the rotovator, it's rough but all free running. Also close up shot of the finger bar serial number. 3 Share this post Link to post Share on other sites
Pullstart 62,843 #6 Posted April 11, 2023 That’s a diamond in the rough Dan! Congrats! 1 Share this post Link to post Share on other sites
Dan.gerous 2,696 #7 Posted April 11, 2023 31 minutes ago, Pullstart said: That’s a diamond in the rough Dan! Congrats! More rough than diamond - zoom in on the steering pedestal, will need some steel adding at the bottom. Not sure how much of the finger bar is missing. Share this post Link to post Share on other sites
Pullstart 62,843 #8 Posted April 11, 2023 I’m not sure if you care to share what you paid for the bundle, but I hope you got it for a song and dance. 1 1 Share this post Link to post Share on other sites
Dan.gerous 2,696 #9 Posted April 11, 2023 23 minutes ago, Pullstart said: I’m not sure if you care to share what you paid for the bundle, but I hope you got it for a song and dance. Too much, but at least it's not rotting away anymore. Stuff is harder to find over here so it's got a value as a parts machine. 2 Share this post Link to post Share on other sites
ebinmaine 67,460 #10 Posted April 11, 2023 Good find and I'm glad to see it has a great home now. 1 Share this post Link to post Share on other sites
