c-series don 8,677 #1 Posted March 28, 2023 Looking for new blades for my friends 42” deck that’s on a 414 and my 48” from the same era. Any recommendations are appreciated, thanks! 1 Share this post Link to post Share on other sites
8ntruck 6,993 #2 Posted March 28, 2023 Try your local Toro dealer. Won't be the cheapest price, but they probably have them. Would help to have the model number of the decks when you go looking. 2 Share this post Link to post Share on other sites
Blasterdad 2,691 #3 Posted March 28, 2023 I had good luck with these, great price ! https://www.ebay.com/itm/334758302656?epid=21052806196&hash=item4df12653c0:g:dpcAAOSwd2liRMSU&amdata=enc%3AAQAHAAABACBnviL5CZ62gAbJLwokeU3Ve4F8owNbCBAX8EtMOHPB2Y1ibghNXsEBxRZegleIIpu%2B41xEK5kUD%2By0RTaGthRLvZcTjtMD5MVziZIsAnPUIVPsMxTSjoZ%2Be7p9YWxIIxlFaxR9myxdV2lgnU0LVmiwTgeEZj32%2Bpc%2FMECVCRJ%2BGzTyfeiSvwbsrm6y9sQFFhiggAXWAW3b2yXMV%2FkpNTeN1SavuPrTHdDZcqsGTQvaFecyYtS1exDB%2F7HI0tCNDSRco%2Fc%2B%2B1sztyqqeystGt38C7krLiDpIflEhEyLrZ2KQlwW07SCpZMX37GSBkOH65nBQkhG2VTMaZUGzfPJRg0%3D|tkp%3ABk9SR7CnmuLkYQ 3 Share this post Link to post Share on other sites
Lee1977 6,652 #4 Posted March 28, 2023 (edited) XHT blades are the toughest I ever used and I bought the C-120 in 1977. I have used them for around five years. I take them off and use gater blades with the vacuum and it's still on. Edited March 28, 2023 by Lee1977 3 Share this post Link to post Share on other sites
peter lena 8,590 #5 Posted March 28, 2023 @c-series don been using a small fine file on my touch ups , minimize the metal removal , regulaty check over all related , movement areas . pete 2 Share this post Link to post Share on other sites
c-series don 8,677 #6 Posted March 28, 2023 Thanks everyone for your suggestions. @peter lena filing may be an option for my blades but my buddies are way past filing or grinding! 1 Share this post Link to post Share on other sites
peter lena 8,590 #7 Posted March 29, 2023 @c-series don on the unit I picked up , there was a rear bagging unit , 37" deck set up , deck was smoked , blades were closer to nubs than cutters . pete 1 Share this post Link to post Share on other sites
