JimmyJam 542 #1 Posted March 27, 2023 I need more information on a rear-discharge deck. Doesn't show up in the "Manual" section. Model # 10475 8 Any information would be helpful. Thanks! 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,037 #2 Posted March 27, 2023 The 1-0475 is a 1973 10hp Automatic tractor. The deck sold in 1973 was model 5-0621 but may not be the one you have. Since there is no illustration of the parts this older 1972 list may help. Let us know if you need more. 3 Share this post Link to post Share on other sites
JimmyJam 542 #3 Posted March 27, 2023 (edited) 23 minutes ago, gwest_ca said: quest_ca Thanks! I am helping a friend with a WH No Name 10. I told him to snap a picture of the deck ID. Apparently he snapped a picture of the tractor's ID. Oooppps! Edited March 27, 2023 by JimmyJam Share this post Link to post Share on other sites
JimmyJam 542 #4 Posted March 27, 2023 (edited) Answer found....Mower Deck ID# is 5-0621 9 (1974) Question(s): Where could I purchase the 3 set of blades?? What would be the correct length for the mower deck drive belt be? Thanks! Edited March 27, 2023 by JimmyJam Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,037 #5 Posted March 28, 2023 The belt and blade set is listed on the 5-0621 TPL above. (TPL = Toro parts list - TIPL = Toro illustrated parts list) (The CW is for clockwise rotation of the blades. Around this time period Wheel Horse also had models using CCW blade rotation and it is impossible to know what deck used what without that) Any Toro dealer can supply the 8969 blade set but shop around. Check the center hole in the blade of each spindle because the replacement assemblies used blades with 3/4" round hole making these blades wrong. https://www.partstree.com/parts/toro-commercial-8969 1 2 Share this post Link to post Share on other sites
