ebinmaine 68,257 #1 Posted March 20, 2023 I have a 6 speed in need of internal gears. Are there other transmissions that can be donors? 1 Share this post Link to post Share on other sites
ri702bill 8,482 #2 Posted March 20, 2023 Eric - while waiting for those in the know to chime in - hows about looking thru the parts manuals for a model with a 4 speed, another one a 6, and another an 8 ?? Could make for some light reading in the can... 1 1 3 Share this post Link to post Share on other sites
953 nut 55,743 #3 Posted March 20, 2023 (edited) Six speeds were only used in 1967 and 1968 but as you surmised the internal gears were common to must uni-drive transmissions from earlier years. Changes have been made over the years to improve the transmissions and new model numbers assigned even though only one component or type of part was changed. I have one 953 transmission that had some internal gears that didn't match any other units I had rebuilt but it was a working unit so I replaced bearings and seals and put it back together; works fine. Lay the parts out side by side and school us on what looks like it is compatible. Edited March 20, 2023 by 953 nut 3 Share this post Link to post Share on other sites
WHX?? 49,145 #4 Posted March 20, 2023 What gears do you need. 1 1 Share this post Link to post Share on other sites
Pullstart 63,081 #5 Posted March 20, 2023 25 minutes ago, WHX?? said: What gears do you need. I got a couple extra stuffs laying around if you’re in need as well. 2 1 Share this post Link to post Share on other sites
JimSraj 433 #6 Posted March 20, 2023 Also have parts from a 6 speed if you need. 2 1 Share this post Link to post Share on other sites
WHX?? 49,145 #7 Posted March 20, 2023 Dan's got a bucket o gears as he is the official tranny parts queen. We been pickin through it pretty hard on our builds tho. 1 1 1 Share this post Link to post Share on other sites
ebinmaine 68,257 #8 Posted March 20, 2023 All you guys are awesome. The pictures below show the gears that are worn. If this was a show cruiser I wouldn't hesitate half a heartbeat to put them all back in but this will be a PRIMARY worker for Trina. 2 Share this post Link to post Share on other sites
Lane Ranger 10,992 #9 Posted March 20, 2023 (edited) The cluster gear is available on any Wheel Horse gear driven transmission. They are all the same from three piece RJ’s thru last one built in 2007! Edited March 20, 2023 by Lane Ranger 2 2 Share this post Link to post Share on other sites
JCM 9,352 #10 Posted March 20, 2023 Tell Trina to start using the clutch a little more. You know I would never have the........ to say that to her face don't you. 4 Share this post Link to post Share on other sites
JCM 9,352 #11 Posted March 20, 2023 Sorry Trina I just listened to the intro to Shine on You Crazy Diamond with David Gilmour and I'm in a really good mood. 2 2 Share this post Link to post Share on other sites
stevasaurus 22,856 #12 Posted March 20, 2023 The parts manuals have the answer to your questions. 2 1 1 Share this post Link to post Share on other sites
WHX?? 49,145 #13 Posted March 20, 2023 Cluster gear is the same & looks like the others are too. I would run the reverse gear they all look like that. Fer sure a new third gear from Lowell and he may have the others as well. Don't scrap the old ones I know a guy who repurposes them.... 1 4 Share this post Link to post Share on other sites
ebinmaine 68,257 #14 Posted March 20, 2023 22 minutes ago, JCM said: Tell Trina to start using the clutch a little more. You know I would never have the........ to say that to her face don't you. 2 Share this post Link to post Share on other sites
ebinmaine 68,257 #15 Posted March 20, 2023 9 minutes ago, stevasaurus said: The parts manuals have the answer to your questions. That would be awesome but I don't even know how to find them on this ridiculous phone... 1 1 Share this post Link to post Share on other sites
WHX?? 49,145 #16 Posted March 20, 2023 1 minute ago, ebinmaine said: don't even know how to find them on this ridiculous phone... Shirley you must have this one... wheelhorse_6-8mechtransman.pdf 1 1 Share this post Link to post Share on other sites
JCM 9,352 #17 Posted March 20, 2023 Stop calling me Shirley, that was my Mothers name @WHX?? 5 Share this post Link to post Share on other sites
WHX?? 49,145 #18 Posted March 20, 2023 Well now we have a Silvia... and a Shirley... didn't I say Dan is the tranny queen? 5 Share this post Link to post Share on other sites
SylvanLakeWH 25,911 #19 Posted March 20, 2023 11 minutes ago, WHX?? said: Well now we have a Silvia... and a Shirley... didn't I say Dan is the tranny queen? 4 Share this post Link to post Share on other sites
ebinmaine 68,257 #20 Posted March 21, 2023 7 hours ago, JCM said: Tell Trina to start using the clutch a little more. You know I would never have the........ to say that to her face don't you. 7 hours ago, JCM said: Sorry Trina I just listened to the intro to Shine on You Crazy Diamond with David Gilmour and I'm in a really good mood. No worries brother man. Trina says she'll keep this in mind when you wanna see some more Karate 🥋 moves. She MIGHT forgive you as long as we have a good place to set up camp. 1 2 Share this post Link to post Share on other sites
JCM 9,352 #21 Posted March 21, 2023 Would love to see some moves in the DoJo someday. You can set up camp over the Brook if you want. Would like to build a wide bridge over that someday. For tractors and people. 1 1 Share this post Link to post Share on other sites
ebinmaine 68,257 #22 Posted March 21, 2023 7 hours ago, JCM said: Would love to see some moves in the DoJo someday. You can set up camp over the Brook if you want. Would like to build a wide bridge over that someday. For tractors and people. Drop a couple hemlocks and lay some boards across. Excellent bridge there. 1 Share this post Link to post Share on other sites
wallfish 17,078 #23 Posted March 21, 2023 8 hours ago, JCM said: Would like to build a wide bridge over that someday. For tractors and people. This one is very interesting and looks like it belongs in the woods of Maine but obviously done by someone WAY above my pay grade. Search images of "Garden bridge" for some ideas or DIY garden bridge 1 3 Share this post Link to post Share on other sites
JCM 9,352 #24 Posted March 21, 2023 31 minutes ago, ebinmaine said: Drop a couple hemlocks and lay some boards across. Excellent bridge there. Funny you should say that. The last big snow storm snapped the top off of a large hemlock right at the brook. There are plenty of those out there and not really good for much other than the whitetails like to bed down under them in the snow. My next attachment for the JD this year is going to be a set of 48'' front forks. That will help placing those hemlocks across the brook. May have to put that on the list 2 Share this post Link to post Share on other sites
WHX?? 49,145 #25 Posted March 21, 2023 3 hours ago, JCM said: attachment for the JD this year is going to be a set of 48'' front forks. You would not be sorry Plunge. I got a set right off and they are on more than the bucket. I have a set of clamp on's for the 520 FEL but light stuff only... too much weight out too far loosens up the rear. 2 Share this post Link to post Share on other sites
