Options for rear weight carrying?

[ebinmaine 67,334]

10 minutes ago, Sailman said:

"Digger" my C-120 came with those tires on the back and they work great with my front push blade. Pushed a whole lot of dirt and gravel with that tractor! Going to add the same tread to the fronts since steering traction when pushing was the only weak area.

Can you post a pic of the tires that are on the back of your c-120?

 

I couldn't find these in a large enough size... 

[Sailman 1,291]

will do.

[pfrederi 17,685]

22 hours ago, gwest_ca said:

A cubic foot of concrete weighs 150 lbs.

A cubic foot of cast iron weighs 450 lbs.

 

 

 

Don't be a Wuss  Get a cubic foot of depleted uranium  1,175 lbs  go big or go home

[ebinmaine 67,334]

26 minutes ago, pfrederi said:

 

 

Don't be a Wuss  Get a cubic foot of depleted uranium  1,175 lbs  go big or go home

Why does it have to be depleted??

😄

[pfrederi 17,685]

2 minutes ago, ebinmaine said:

Why does it have to be depleted??

😄

Depleted is denser....

[ebinmaine 67,334]

1 minute ago, pfrederi said:

Depleted is denser....

Yes yes yes.  

[Sailman 1,291]

Eric,

Attached are the pictures of the tires. I think they may actually be ATV tires. No telling how old they are or if they are still available. They are great diggers!!

Edited March 3, 2023 by Sailman

[Sailman 1,291]

Just looked on e-bay and they have these in 23 inch, 24 inch and 25 inch. Enter the following in e-bay search;

 

carlisle AT 489 atv tires AT23 x 10-12

 

......but they ain't cheap! 

 

Edited March 3, 2023 by Sailman

[ebinmaine 67,334]

26 minutes ago, Sailman said:

carlisle AT 489 atv tires AT23 x 10-12

[953 nut 55,124]

18 hours ago, pfrederi said:

 

 

Don't be a Wuss  Get a cubic foot of depleted uranium  1,175 lbs  go big or go home

Built in backup lights with the Cherenkov effect.                 

[ebinmaine 67,334]

3 minutes ago, 953 nut said:

Built in backup lights with the Cherenkov effect.                 

 

Probably wouldn't need a battery for the tractor or anything else around either

[pfrederi 17,685]

1 hour ago, ebinmaine said:

 

Probably wouldn't need a battery for the tractor or anything else around either

 Sorry depleted uranium will not run your lights... but it will stop bullets from annoying neighbors...  used as armor plate on latest generation of M-1 tanks

[ebinmaine 67,334]

3 minutes ago, pfrederi said:

stop bullets from annoying neighbors

To the best of my knowledge none of my neighbors are shooting my direction on purpose but protection from flying metal is always a plus! 

[squonk 41,041]

One thing overlooked. Weight is fine. But there is only so much the tractor components will tolerate. These aren't Euclid TC-12 dozers we're running. Somethings gotta give and I'd rather have a wheel start to spin as opposed to snapping a gear or axle. 

[OutdoorEnvy 1,522]

8 minutes ago, ebinmaine said:

To the best of my knowledge none of my neighbors are shooting my direction on purpose but protection from flying metal is always a plus! 

 

 

As long as we aren't firing up the kohlers at 3am we can generally avoid being shot at 

[peter lena 8,589]

@ebinmaine https://www.zoro.com/mason-vibration-iso-pad-3x3x34-in-pk2-2lvr5/i/G3114036/?  use this under my rear hitch , forward extension , under trans , stops hitch bounce and insulates against vibration . have what is  left of a  sheet , mine is orange with circular indents , used it to mount pumps / drives . reference is only for  type of  trans protection , eliminates hitch , play , sloppiness against impact , pete 

[ebinmaine 67,334]

3 hours ago, squonk said:

One thing overlooked. Weight is fine. But there is only so much the tractor components will tolerate. These aren't Euclid TC-12 dozers we're running. Somethings gotta give and I'd rather have a wheel start to spin as opposed to snapping a gear or axle. 

 

Good point to bring forward.  

Absolutely agreed. 

 

I haven't overlooked it.  

That was in fact the primary reason and one of the first lines in initial post. 

I want as much weight as the tractor  can handle but not at the compromise of

durability or   SAFETY. 

For me, yes .. and for the machine.  

 

[ebinmaine 67,334]

3 hours ago, OutdoorEnvy said:

 

 

As long as we aren't firing up the kohlers at 3am we can generally avoid being shot at 

I've DEFINITELY done that with the odd work schedule that I have..... 

[Sailman 1,291]

On 3/3/2023 at 9:43 AM, squonk said:

One thing overlooked. Weight is fine. But there is only so much the tractor components will tolerate. These aren't Euclid TC-12 dozers we're running. Somethings gotta give and I'd rather have a wheel start to spin as opposed to snapping a gear or axle. 

 

What would you folks suggest is a reasonable amount of weight? I am building a box for the 3 pt hitch on my GT 14 and figured if I could get between 200 and 300 lbs. on it I would be good to go. The GT 14 is a heavy tractor to begin with. Also, would like some info on how to put fluid in the rear tires. They are 15 inch with tubes. What say you all??

[Handy Don 12,178]

1 hour ago, Sailman said:

 

What would you folks suggest is a reasonable amount of weight? I am building a box for the 3 pt hitch on my GT 14 and figured if I could get between 200 and 300 lbs. on it I would be good to go. The GT 14 is a heavy tractor to begin with. Also, would like some info on how to put fluid in the rear tires. They are 15 inch with tubes. What say you all??

Not an expert voice but calling out the difference between:

- weight in or attached to the wheels/tires (supported at the ground only via tires) vs.

- weight attached to the frame (supported by frame, transaxle, and wheel bearings then to the tires and then ground).

 

There is less wear and tear on the tractor from the first than the second.

[ebinmaine 67,334]

On 3/4/2023 at 11:07 AM, Sailman said:

 Also, would like some info on how to put fluid in the rear tires. They are 15 inch with tubes. What say you all??

 

@squonk and @Pullstart have both done videos on fluid filling.  

I've been running Rimguard Tire Filling Fluid for years. 

Around here it's at or near the same price as RV antifreeze or even less.  

 

Trina and I just did the first set of ours by ourselves.  

I bought some 5 gallon pails and picked up the Rimguard at the distributor. 

We used a drill mounted pump. It was... Ok. 

Dreadfully slow!! But it worked.  

 

 

[squonk 41,041]

 

[Pullstart 62,812]

@Sailman here is a playlist I’ve created on the subject if you care to browse videos 

 

Fluid Filling Tractor Tires

 

[Lee1977 6,651]

There's an angle attached to the left side of the receiver hitch bracket with a slot cut in it and the top is bent forward for the chain from the clevis hitch when not attached to the lift.

I can also use it for rear attached equipment depth control.  Note it's not welded on, it slips on and is helt tight with a set screw from the bottom.

Edited March 8, 2023 by Lee1977