ri702bill 8,323 #2 Posted February 25, 2023 (edited) Nah - but it looks like the 2 at the top had a litter of puppies !!! You do realize the long main jet needles are different between the small 8 HP carbs and the larger 10+ models?? And that all the needles are hollow with teensy-tiny air bleed holes at both ends...?? Be sure they are open.... Looks like a couple of shiny new bowls there too... Edited February 25, 2023 by ri702bill 2 1 Share this post Link to post Share on other sites
ebinmaine 67,508 #3 Posted February 25, 2023 24 minutes ago, ri702bill said: Nah - but it looks like the 2 at the top had a litter of puppies !!! You do realize the long main jet needles are different between the small 8 HP carbs and the larger 10+ models?? And that all the needles are hollow with teensy-tiny air bleed holes at both ends...?? Be sure they are open.... Looks like a couple of shiny new bowls there too... Oh yeah absolutely. The disassembled two are both #30s off K341s. Bowls.... Yeah... There's more in a box too... 1 Share this post Link to post Share on other sites
ri702bill 8,323 #4 Posted February 25, 2023 25 minutes ago, ebinmaine said: Oh yeah absolutely. The disassembled two are both #30s off K341s. Bowls.... Yeah... There's more in a box too... Don't got nuttin' down heah that big - got 20's and 22's from 7 & 8 HP Kohlers..... Share this post Link to post Share on other sites
ebinmaine 67,508 #5 Posted February 25, 2023 36 minutes ago, ri702bill said: Don't got nuttin' down heah that big - got 20's and 22's from 7 & 8 HP Kohlers..... There's a wee bitty techy one, 2 Kohler 8 HP carbs, a 12 HP Kohler imported replacement from isavetractors, 4 #30s for K341, (one's not a WH carb) and also a B & S updraft I just found. I know I have at least another couple wee bitty techy ones, a Tecumseh 16 HP single cylinder carb, and another OE Kohler 12 and Kohler 16 HP single. Holy 💩💩💩. 1 Share this post Link to post Share on other sites
ri702bill 8,323 #6 Posted February 25, 2023 That ought to keep the U-sonic cleaner busy.... Don't be huffin the carb cleaner spray - causes dain bramage... 1 2 Share this post Link to post Share on other sites
JCM 9,168 #7 Posted February 25, 2023 18 minutes ago, ri702bill said: That ought to keep the U-sonic cleaner busy.... Don't be huffin the carb cleaner spray - causes dain bramage... So don't this 1 5 Share this post Link to post Share on other sites
SylvanLakeWH 25,562 #8 Posted February 25, 2023 (edited) Again with the visuals... Will this picture never die...??? I actually just told my neighbor yesterday about this method of "exciting" his generator into firing up... No I did not demonstrate... I left that up to him... after I left... Edited February 25, 2023 by SylvanLakeWH 2 1 3 Share this post Link to post Share on other sites
ri702bill 8,323 #9 Posted February 25, 2023 (edited) 1 hour ago, JCM said: So don't this It's all fun and games until the gas splashes back in you face... I'm afigurin' this is the "Air Starter" version for lawn tractors, not like his video of the Mack tractor...... but on a smaller scale. Edited February 25, 2023 by ri702bill 2 Share this post Link to post Share on other sites
wallfish 17,000 #10 Posted February 25, 2023 29 minutes ago, SylvanLakeWH said: this method of "exciting" his generator 1 3 Share this post Link to post Share on other sites
ri702bill 8,323 #11 Posted February 25, 2023 Whatever floats your boat there, John..... Share this post Link to post Share on other sites
JCM 9,168 #12 Posted February 25, 2023 55 minutes ago, SylvanLakeWH said: Will this picture never die...??? If anyone would rather never see this one again please let EB know in turn he will let me know and you will never see this picture again. I am a Man of my word. I will not be offended. After all I was only 4' away from him when I captured this classic priming method. Never was aware this was possible. Live and learn. 3 Share this post Link to post Share on other sites
8ntruck 7,004 #13 Posted February 25, 2023 Eric - got anything there for a KT19 with a horizontal choke shaft? Share this post Link to post Share on other sites
wallfish 17,000 #14 Posted February 25, 2023 33 minutes ago, ri702bill said: Whatever floats your boat there, John..... Unfortunately I've been caught "exciting" the machines too. Motophellia I'm not quite sure of the pronoun we should use 1 3 Share this post Link to post Share on other sites
ri702bill 8,323 #15 Posted February 25, 2023 11 minutes ago, wallfish said: Unfortunately I've been caught "exciting" the machines too. Motophellia I'm not quite sure of the pronoun we should use 1 Share this post Link to post Share on other sites
c-series don 8,708 #16 Posted February 25, 2023 2 hours ago, ri702bill said: Whatever floats your boat there, John..... In this case it should be whatever floats your float! Trying to get gas in the carburetor to float the float in the bowl. 😂😂 1 2 Share this post Link to post Share on other sites
ebinmaine 67,508 #17 Posted February 25, 2023 1 hour ago, JCM said: If anyone would rather never see this one again please let EB know in turn he will let me know and you will never see this picture again. I am a Man of my word. I will not be offended. After all I was only 4' away from him when I captured this classic priming method. Never was aware this was possible. Live and learn. Don't you be thinkin on what ole @SylvanLakeWH Sylvia/Other Jim says. ~ I ~ get extreme amusement outta the responses from that pic. As the purveyor of @wallfish taught proper and severe machine primerizing in photographically evidenced form I give you permanent permission to post, repost, and repeat repeatedly. 6 Share this post Link to post Share on other sites
SylvanLakeWH 25,562 #18 Posted February 25, 2023 4 hours ago, JCM said: If anyone would rather never see this one again please let EB know in turn he will let me know and you will never see this picture again. I am a Man of my word. I will not be offended. After all I was only 4' away from him when I captured this classic priming method. Never was aware this was possible. Live and learn. Oh not me... only this picture stands above the post announcing "Colossus is Done" in my long term RS bucket list... 2 Share this post Link to post Share on other sites
ebinmaine 67,508 #19 Posted February 25, 2023 5 minutes ago, SylvanLakeWH said: Oh not me... only this picture stands above the post announcing "Colossus is Done" in my long term RS bucket list... Man oh man ... That might be a minute.... 1 Share this post Link to post Share on other sites
ebinmaine 67,508 #20 Posted February 25, 2023 Soo.. uhhh. Trina found a few more.... 1 2 Share this post Link to post Share on other sites
wallfish 17,000 #21 Posted February 25, 2023 4 hours ago, 8ntruck said: Eric - got anything there for a KT19 with a horizontal choke shaft? So, now i'm curious if this was an actual request for a carb part.......... or a clever funny joke? Either way it was perfect timing. I kinda glossed over it the first time but now! 1 1 Share this post Link to post Share on other sites
Bill D 1,921 #22 Posted February 25, 2023 If you run out of good usable float bowls, Briggs and Stratton P/N 221995 works perfectly and can be had for $10 or less. It's an anodized steel bowl used on older Briggs carbs. 1 1 Share this post Link to post Share on other sites
Pullstart 62,889 #23 Posted February 25, 2023 7 hours ago, JCM said: priming method did it actually work? 1 Share this post Link to post Share on other sites
ebinmaine 67,508 #24 Posted February 26, 2023 7 hours ago, 8ntruck said: Eric - got anything there for a KT19 with a horizontal choke shaft? No sir. Not here. 46 minutes ago, Pullstart said: did it actually work? Quite well in fact. Yes. 1 1 Share this post Link to post Share on other sites
Pullstart 62,889 #25 Posted February 26, 2023 1 minute ago, ebinmaine said: Quite well in fact. Yes. perfect! I’ve used compressed air in vehicles before. Why not a human compressor? 1 Share this post Link to post Share on other sites
