CWyatt 13 #1 Posted February 24, 2023 I am looking for an upper index rod 104341 for my c160, anyone have one or know where i might find one? 1 Share this post Link to post Share on other sites
ebinmaine 67,334 #2 Posted February 24, 2023 Are you looking for basically what amounts to a piece of strong wire that goes from The squeeze handle at the top down to the triangular pivot point? Share this post Link to post Share on other sites
squonk 41,041 #3 Posted February 24, 2023 (edited) 12 ga. Ceiling grid hanging wire. Edited February 24, 2023 by squonk 1 Share this post Link to post Share on other sites
CWyatt 13 #4 Posted February 24, 2023 No, it’s a solid rod bent on each end 1 Share this post Link to post Share on other sites
squonk 41,041 #5 Posted February 24, 2023 6 minutes ago, CWyatt said: No, it’s a solid rod bent on each end You get a piece of solid12 ga. ceiling grid wire and bend it. Share this post Link to post Share on other sites
ebinmaine 67,334 #6 Posted February 24, 2023 16 minutes ago, CWyatt said: No, it’s a solid rod bent on each end Can you please post pics of what you have? With measurements? Share this post Link to post Share on other sites
daveoman1966 3,745 #7 Posted February 24, 2023 This is the upper index rod 104341. Buy a 30-36" length of 1/8" dia STEEL ROD from a local hardware or Home depot..Lowes...ValuHome. I've tried using a coat hanger but it is just not rigid enough. The rod might cost you $4. Bend it like this... 4 1 Share this post Link to post Share on other sites
